Brother MFC-J2730DW User Manual page 770

Level 1 Level 2
All Settings -
[Settings] > [All Settings] > [General Setup]
Level 1 Level 2
Maintenance Improve Print
Quality
Print Head Cleaning -
Remove Paper Scraps -
Ink Volume
Ink Cartridge Model -
Print Setting
Options
Tray Setting Tray #1
Tray #2
MP Tray
Tray Setting: Copy
Tray Setting: Fax
Tray Setting: Print Tray
Tray Setting: JPEG
Print (Media)
Paper Low Notice
(MFC-J5930DW)
Check Paper
Quiet Mode -
Volume Ring
Beep
Speaker
LCD Settings Backlight
Level 3 Descriptions
- Configure the detailed settings.
Level 3
-
-
Reduce
Smudging
Reduce
Uneven Lines
Slow Drying
Paper
Paper Type
Paper Size
Paper Size
Paper Type
Paper Size
Tray Use
Tray
Priority
Tray Use
Tray
Priority
Priority
Tray Use
Tray
Priority
-
-
-
-
-
-
-
Descriptions
Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Clean the print head according to the LCD
instructions.
Remove a piece of paper in the machine
according to the LCD instructions.
Check the available ink volume.
Check your ink cartridge numbers.
Reduce smudging on the paper or paper jams
during printing.
Reduce uneven lines on the paper during printing.
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Set the type of paper in paper tray #1.
Set the size of paper in paper tray #1.
Set the size of paper in paper tray #2.
Set the type of paper in the MP tray.
Set the size of paper in the MP tray.
Select the tray to be used for copying.
Change the tray priority for copying.
Select the tray to be used for faxing.
Change the tray priority for faxing.
Change the tray priority for printing from your
computer.
Select the tray to be used for printing photos from
a USB flash drive.
Change the tray priority for printing photos from a
USB flash drive.
Select whether to display a message telling you
that the paper tray is nearly empty.
Check the paper type and paper size when you
pull the tray out of the machine or set the paper in
MP tray.
Decrease printing noise.
Adjust the ring volume.
Adjust the beeper volume.
Adjust the speaker volume.
Adjust the brightness of the LCD backlight.
763