Brother MFC-J2730DW User Manual page 275

7. Press [Options].
8. Press the setting you want to change.
9. Press your new option.
10. Repeat the last two steps to change other settings if needed.
11. When you have finished changing settings, press [OK].
12. Press [Mono Start] or [Colour Start].
13. If you are using the scanner glass when choosing the [A3 2in1] option, repeat the following steps
for each page of the document:
• Place the next page on the scanner glass, and then press [Continue] to scan the page.
• After scanning all the pages, press [Finish].
MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
1. Load your document.
2. Swipe left or right or press d or c to display [A3 Copy Shortcuts], and then press it.
3. If information appears on the Touchscreen, read it, and then press [OK] to confirm.
4. Swipe left or right or press d or c to display options, and then press the option you want.
Option Description
A3 2in1
A4 ⇒ A3
A4 + Note(L)
A4 + Note(P)
A4 + Grid
A4 + Blank
A4 Centre
5. Press [OK].
6. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the
Touchscreen keyboard. Press [OK].
268