Brother MFC-J2730DW User Manual page 756

[Settings] > [All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
WLAN TCP/IP
Level 3 Level 4
BOOT Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server -
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
BOOT Method -
IP Address -
Subnet Mask -
Gateway -
Node Name
-
WINS -
Configuration
WINS Server -
DNS Server -
APIPA -
IPv6 -
Descriptions
Select the BOOT method that
best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration
mode.
Specify the IP address of the
primary or secondary WINS
server.
Specify the IP address of the
primary or secondary DNS
server.
Set the machine to allocate the
IP address from the link-local
address range automatically.
Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC
address.
Select the BOOT method that
best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration
mode.
Specify the IP address of the
primary or secondary WINS
server.
Specify the IP address of the
primary or secondary DNS
server.
Set the machine to allocate the
IP address from the link-local
address range automatically.
Turn the IPv6 protocol on or off
for a wireless LAN. To use the
IPv6 protocol, go to the Brother
Solutions Center at
support.brother.com for more
information.
749