Brother MFC-J2730DW User Manual page 774

Level 1
WLAN
Wi-Fi Direct
NFC
(MFC-J5930DW)
E-mail/IFAX
(Available after Internet
Fax (I-Fax) is
downloaded.)
Level 2 Level 3
WLAN Status SSID
Comm. Mode
MAC Address -
Push Button -
PIN Code -
Manual -
Group Owner -
Device Device Name
Information
SSID
IP Address
Status Status
Information
Signal
I/F Enable -
- -
Mail Address -
Setup Server SMTP
POP3/IMAP4
Level 4 Descriptions
- View the current SSID.
- View the current
Communication Mode.
- View the machine's MAC
address.
- Configure your Wi-Fi Direct
network settings using the
one-button push method.
- Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
- Configure your Wi-Fi Direct
network settings manually.
- Set your machine as the
Group Owner.
- View your machine's device
name.
- View the Group Owner's
SSID.
When the machine is not
connected, the LCD displays
Not Connected.
- View your machine's current
IP Address.
- View the current Wi-Fi Direct
network status.
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
- Turn the Wi-Fi Direct
connection on or off.
- Turn the NFC function on or
off.
- Enter the email address.
(Up to 60 characters)
Server Enter the SMTP server name
and address.
Port Enter the SMTP port number.
Auth. for SMTP Select the Security method for
email notification.
SSL/TLS Send or receive an email via
an email server that requires
secure SSL/TLS
communication.
Verify Verify the SMTP Server
Certification Certificate automatically.
Protocol Select the protocol for
receiving an email from the
server.
767