Lippe Lift T80 Assembly Manual page 9

5 Loosen the front paneling of the platform.
Rotate the roller heads in accordance with the angle of elevation (of the flight of stairs). Position
6.)
the platform so that the dimensions X, Y and Z given in the installation drawing are maintained for
the track pipes which are inserted and fastened in the roller sets (e.g. on the fastening plates).
By ventilating the brake, activating the brake lever and simultaneously rotating the hand wheel, the
drive sprocket can be rotated and thus the upper track pipe inserted further (illustration below). The
upper sprocket is a part of the gripping device and is not powered, thus this can be easily rotated by
hand.
A
B
2.
Installation manual Konstanz DC
Y
α
X
Y
α
X
1.
A
B
Z
9/25 Version 8.0
α
X
α
Last update: 2/15/10