Lippe Lift T80 Assembly Manual page 3

Check whether the on-site measures have been carried out (e.g. removal of the railing, chamfer
1
beveling, removal of the opposite-lying hand rail, current laying etc.).
In order to avoid damages, only the parts currently needed should always be unpacked. The
2
unpacked parts of the installation should be temporarily stored on the foam which is delivered
with them. The platform can be attached to the cabinets (as far in as possible) and thus
transported.
3.) Place and dowel the supports (in case of support assembly) in accordance with the installation
drawing. In the process, make sure that the supports are attached vertically (Water level).
Installation manual Konstanz DC
Important !!
Absolutely observe
appendix 1 on page 19 !
Dowel type to be used:
Appendix II
3/25 Version 8.0 Last update: 2/15/10