Lippe Lift T80 Assembly Manual page 14

12.) In the shortest possible distance from the upper sprocket, an auxiliary overrun fuse must be
mandatorily attached behind the upper end position, as displayed above. The overrun fuse must be
attached without distances to the drive rod.
13.) The emergency end switch curve should be positioned so that in the case of an adjacent drive roller
on the overrun fuse, the emergency end switch is activated (opened).
14.) The nuts of the roller set should be tightened and secured as displayed below!!!
B
A
B
Installation manual Konstanz DC
Overrun
Y
J
A
A
14/25
Y
F
B
Secure with Loctite!
F:DIN125-13-St.
J:DIN985-M12 (M=50Nm)
K:DIN6797-I21
L:DIN936-M20x1,5 8.8 (M=50Nm)
Version 8.0
Dimension X
L K
Last update: 2/15/10