Up And Down Keys; Display - Valmar Sweety Quick 60 Operating And Maintenance Manual

7.2.4 MIXING PHASE
This light signal is lighted on if the slow hand-selected mix is chosen.
This light signal is lighted on if the fast hand-selected mix is chosen.
The user can change the mixing speed during the mixing cycle by pressing
MIXING MODE key and chose between slow, fast or automatic speed.
If automatic mode is selected, both light signals are switched on (snail and rabbit).

7.3 UP and DOWN keys

UP key
Pressing UP key:
will stop beeping at the end of the phase;
will stop error beeping;
until the UP key is pressed the display shows the glycol
temperature;
if the appliance is in STOP position, the simultaneous pressing of
the UP and COOLING AND CONSERVATION keys activates
glycol pump and the display shows Pum.
DOWN key
Pressing DOWN key:
until the DOWN key is pressed, if the appliance is not in mixing
phase, the display shows the mixtures temperature in the pot ;
if the appliance is in mixing phase, pressing DOWN key will
display the mixtures temperature in the pot until next pressing of
the key.

7.4 DISPLAY

7.4.1 Messages
Appliance in STOP mode
If the display shows OFF it means that the appliance is in STOP
OFF
mode.
20