Table of Contents
Advertisement
ARC System 2
62
When I open the measurements set on my ARC 2 Plug-In and turn the cor-
rection ON, the resulting sound and the displayed response is strange and
incorrect, making the monitors sound worse than when ARC 2 Plug-In is not
enabled. Do you have any suggestions?
Please check if the ARC 2 Measurement Microphone is working, by
connecting the microphone to a +48V phantom microphone preamp
and listening to it through headphones. The microphone should exhibit
a neutral, clean sound. If the microphone is not working, producing
loud noises, or having a very weak output signal, please contact IK
Multimedia Technical Support.
7 - Troubleshooting
Advertisement
Table of Contents
