Table of Contents
Advertisement
5 - Using the ARC 2 Plug-In
The unavailable features are:
• Correction Curevs are limited to the standard four Audyssey
target.
• Custom EQ drag functions will be disbled.
• Legacy Measures won't be available when ARC 2 is used in sessions
where sample rate is beyond 96KHz as previous versions of ARC
System could not go past that sample rate.
• Combined L/R correction.
• Improved resolution.
We strongly suggest you take the time to properly measure your room again
so that you will be able to fully take advantage of the four times improved
resolution of the new MultEQ
ARC 2 amazing features.
5.1.3 Target Curve menu
To cover a wide range of room types, the ARC 2 provides a selection of four
Factory Target Curves created by Audyssey plus a set of 4 custom, user
definable curves. Click this menu (figure 5.4) to select one of these eight
Target Curves:
figure 5.4
• AUDYSSEY FLAT
• AUDYSSEY HF Roll-off 1
• AUDYSSEY FLAT (Mid Comp)
• AUDYSSEY HF Roll-off 1 (Mid Comp)
• Custom 1
• Custom 2
• Custom 3
• Custom 4
ARC System 2
®
XT32 plug in architecture and all of the new
factory
®
41
Advertisement
Table of Contents
