Table of Contents
Advertisement
ARC System 2
2) The second step is to apply the correction as a plug-in in your preferred
DAW.
Open your DAW (such as Pro Tools
®
, Cubase
®
, Logic
®
, Sonar
®
, Live™, Digital
Performer™, etc.), and insert the ARC 2 Plug-In (figure 1.5) on the stereo
master bus, load the measurement file you just saved from the measure-
ment menu, turn the correction on, and voilà, the alterations introduced by
your room acoustics will be corrected. This will allow you to finally trust the
sound of your studio monitors and room.
figure 1.5
This particular screen-shot of the ARC 2 Plug-In (figure 1.6) shows how
a highly distorted monitoring system is flattened almost perfectly when
MultEQ
®
XT32 is applied.
figure 1.6
Orange shows the actual room response, green shows the flat-response
of an ideal speakers/room system, and white shows the corrected room
1 - Overview
13
Advertisement
Table of Contents
