Table of Contents
Advertisement
ARC System 2
4.3 STEP 1 - Microphone Selection
The ARC 2 Measurement Microphone is available in two slightly different
versions. It is important to keep in mind that neither microphone is inher-
ently better or worse; It is simply that due to a small difference in frequency
response the software must be told which microphone you are using to
ensure the most accurate measurement possible.
To determine which microphone type you're using, simply check the P/N
number on the label of your microphone, and then select the corresponding
option on the ARC 2 Measurement application (figure 4.2). This number is
located above the XLR connector on your microphone. You can also deter-
mine which microphone type you have by checking to see if your microphone
has an orange ring around the microphone located near the XLR connector.
figure 4.2
Once you have selected which microphone type you have, click NEXT to
proceed with the ARC 2 Measurement process. If you have not selected a
microphone type, you will not be able to click NEXT to continue.
IMPORTANT: if the wrong microphone type is selected, the resulting ARC 2
correction will be incorrect. Please take the time to make sure that you have
selected the correct microphone to ensure an accurate measurement!
4 - Using the ARC 2 Measurement
24
Advertisement
Table of Contents
