Table of Contents
Advertisement
ARC System 2
Example 2
Studio, two chairs, wider listening position (figure 4.13).
figure 4.13
Main position is marked as 1, and it is perfectly centered between the two
speakers at the listening position. This is the position you should use to
calibrate levels and for the first measurement.
All other measurements are symmetrical to an imaginary central line, so
measurements after the initial one (main position) are taken alternatively
on the Left and Right side.
The optimized listening area is wider than the one shown in figure 4.13, so
the measured points location are distributed in a way that covers the entire
listening area.
4 - Using the ARC 2 Measurement
32
Advertisement
Table of Contents
