Table of Contents
Advertisement
ARC System 2
Chapter 5 Using the ARC 2 Plug-In
5.1 ARC 2 Plug-In interface
ARC 2 Plug-In is a multiplatform audio processor that applies the correction
curve measured with the ARC 2 Measurement software to the incoming
audio stereo signal in real-time. It is comprised of three operation windows
each one dedicated to specific tasks.
5.1.1 Play Window
This window (figure 5.1) is where you can see how ARC 2 is performing the
correction on your monitoring:
figure 5.1
The ARC 2 Plug-In applies one of the measurement sets you have saved from
the ARC 2 Measurement software on your stereo master bus to match sev-
eral different target curves. You are able to switch from one measurement
set to another allowing you to compare your saved options and meet your
different sonic needs.
It will also show graphical frequency responses for the left and right chan-
nels both before and after the correction.
The ARC 2 Plug-In alters the stereo master bus level. For this reason, a preci-
sion peak meter is included to show both input or output levels (pre/post) so
that the actual project master level can still be kept under control.
5 - Using the ARC 2 Plug-In
39
Advertisement
Table of Contents
