Table of Contents
Advertisement
ARC System 2
interface and your speakers (like a mixer, a monitor management system, etc),
please check that their settings do not alter the audio signal in any way (e.g.,
no tone controls, no mono switch, phase reverse, etc).
If you use a powered subwoofer that performs bass management, just connect
your audio interface outputs to the subwoofer inputs, and your L and R satel-
lites to the proper subwoofer outputs. This way, the system will still be seen as
a standard dual channel system (with an increased low frequency extension).
3.2.2 Powered Speaker setup
Figure 3.1 shows one possible way to connect your system components
when powered speakers are used.
figure 3.1
3 - Setup for measurements
18
Advertisement
Table of Contents
