Table of Contents
Advertisement
ARC System 2
28
4.5.2 Microphone height
Set the microphone to the same height where your ears are when listening
to the speakers (figure 4.7).
figure 4.7
At this point, you should have your ARC 2 Measurement Microphone con-
nected to the audio interface mic input (+48 V phantom power ON), pointed
at the ceiling, and at the correct height.
Now place the microphone at the main position (figure 4.8).
figure 4.8
Once the microphone is correctly positioned at the main position, you can
start checking levels.
1. Lower your studio listening volume to ZERO. The studio listening
volume can be controlled on your audio interface with the main
outputs level control or with your monitoring management system.
4 - Using the ARC 2 Measurement
Advertisement
Table of Contents
