SMC Networks HRZ001-L Operation Manual page 37

7.
Connect the power cables to the breaker terminal.
Be sure to use a Phillips screwdriver. See Table 3-1 on Page 3-8 for recommended torque.
8.
Connect the grounding terminal (M8) of
the power cable to the earth bar.
Be sure to use a 13-mm open end wrench.
Recommended torque: 12.5 N•m (9.22 ft-lbf)
9.
Attach the breaker cover to the breaker.
10.
Attach the front panel.
11.
Connect the power cable to the power breaker on customer side (primary side).
HRZ Series
Grounding terminal
Figure 3-11 Connection of Power Cable and Grounding Terminal
[Tips]
See "Table 3-1 Power Cable and Main Breaker (This System)" on page 3-8
for torque value.
Chapter 3 Transporting and Installation
Power cable
Earth bar
HRX-OM-I051
Main breaker
3.3 Procedure for Installation
3-13