SMC Networks HRZ001-L Operation Manual page 20

HRX-OM-I051
Chapter 1 Safety
 Reset of emergency off [EMO] switch
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may occur if disregarded.
1.
Before restarting, always make sure that the cause of the emergency off condition (The
reason why the EMO switch was activated) has been eliminated from the power supplies,
the system and peripheral equipment.
2.
With the cause completely eliminated,
turn the emergency off [EMO] switch
clockwise to reset.
The EMO button returns to its original position.
When the system is in remote mode, the remote mode is retained despite the
power outage. Thus the system operation is to resume as the start signal is
issued from your system.
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
3.
The screen then changes from the "Model Indication screen" to "Status screen 1" as power
Potential serious accidents may be concerned occur if disregarded.
is being restored to the system.
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may be concerned occur if disregarded.
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may be concerned occur if disregarded.
1.6 Emergency Measures
1-14
Figure 1-17 Emergency Off [EMO] Switch
HRZ Series