Related Manuals for Euro Video EVD-16/400A16MN
Summary of Contents for Euro Video EVD-16/400A16MN
-
Page 1: Digital Video Recorder
User’s Manual INSTALLATION/OPERATION REAL TIME DIGITAL VIDEO RECORDER (MPEG4 –16 CHANNEL) EVD-16/400A16MN www.eurovideo-cctv.com... - Page 2 Trade marks All names used in this manual for hardware and software are very probably registered trade marks and must be treated as such. EVD-16/400A16MN www.eurovideo-cctv.com...
-
Page 3: Table Of Contents
S e a r c h … … … … … … … … … … … … . … … … … … … … … … … … … … … … … … … … … . … … … 3 5 BackUp……….……………………………………………………………………………….………39 Log……….……….……………………….……………………………………………………….………41 Client Program…………………………………………………………………………………......42 Q & A……………….………………………………………………………………………………….…………68 Appendix 1…...………………………………………………………………………..…………………….70 Appendix 2...…………………………………………………………………………..…………………….73 Appendix 3…...…………………………………………………………………..…………………….77 Appendix 4…...…………………………………………………………………..…………………….80 Appendix 5…...…………………………………………………………………..…………………….82 Appendix 6 (Specification) ………….……………………………………………..…………………….89 Product Warranty……………………………………………………………………………………………….91 EVD-16/400A16MN www.eurovideo-cctv.com... -
Page 4: For The Safety Of Customers
Do not put the unit on an unstable place. Do not put the unit on an unstable place like rugged table or slope place. Be careful for the installation position. Don’t put the device in humid, direct sunlight, dusty, hot, greasy condition. EVD-16/400A16MN www.eurovideo-cctv.com... - Page 5 When the lightning starts, don’t touch the plug or cable. It could cause the electric shock..Don’t touch the power plug with wet hand Don’t unplug with wet hands. It could cause a electric shock. Don’t pull out the power cable. Use the designated HDD EVD-16/400A16MN www.eurovideo-cctv.com...
- Page 6 Please keep the socket and plug clean to avoid fire. The plug should be tightly connected to the wall socket. Caution when you don’t use the device for a long time. If you don’t use the device for a while, please switch off and unplug. EVD-16/400A16MN www.eurovideo-cctv.com...
-
Page 7: Description Of Parts And Function
Remote Controller Battery Power Cable User Manual When you have received a product “without HDD” , the accessories 1) stand for HDD installing 2) fixing screws will be supplied. ※ Accessories are subject to change without notice. 2-2 FEATURES EVD-16/400A16MN www.eurovideo-cctv.com... -
Page 8: Description Of Parts And Function
- Full channel real-time monitoring - Live monitoring, recording, playback, backup, remote access at the same time - Multi channel playback - Variable events notification to e-mail, buzzer or PC Client system 2-3 DESCRIPTION OF PARTS AND FUNCTIONS 2-3-1 Front Panel EVD-16/400A16MN www.eurovideo-cctv.com... - Page 9 - Menu selection (7) ARROW KEY - Course shifting on the menu (8) SEARCH - Entering search mode directly (9) STOP & EJECT ( - To stop playback and go back to live mode - To eject CD-RW EVD-16/400A16MN www.eurovideo-cctv.com...
- Page 10 - It manually starts & stops recording of relevant camera in a full screen live mode (14) POWER BUTTON - System Power On/Off (15) USB 2.0 PORT - USB 2.0 connector (16) NUMERIC & CHARACTER - Input for numeric & character EVD-16/400A16MN -10- www.eurovideo-cctv.com...
-
Page 11: Rear Panel
(4) AUDIO OUTPUT - 1 Audio output (5) RS232 - 1 Serial Communication (6) Network Port (RJ-45) - Available to monitor live screen and recorded data on the HDD through Internet or LAN (7) USB 2.0 -USB 2.0 connector EVD-16/400A16MN -11- www.eurovideo-cctv.com... - Page 12 “00000000” i.e. 8x Zero’s. Password is required if you need to down-power or stop recording, prompt will be displayed asking for password. Web Client User ID “admin” (not case sensitive). Admin ID cannot be changed this is full administrator ID. Password “00000000” i.e. 8x Zero’s EVD-16/400A16MN -12- www.eurovideo-cctv.com...
-
Page 13: Connection Diagram
User’s Manual 2-3-3 System Connection Diagram EVD-16/400A16MN -13- www.eurovideo-cctv.com... -
Page 14: Ir Remote Controller
17. ▶(▶) : Play(or fast forward) 18. ◀ (◀ ) : Reverse play 19 II : Pause 20. █ : Stopping playback 21. Cam : Changing PTZ icon 22. P/T : Pan &Tilt 23. Z/F : Zoom/ & Focus EVD-16/400A16MN -14- www.eurovideo-cctv.com... -
Page 15: Osd Description
: 1.7GB is used out of 298.0GB -Event(i.e. Power Fail ) : Power Fail, Video loss, etc will be shown when it is occurred. -Network connection : It is shown that admin or user is connected. -Date/Time *Others : -Backup -Mute -USB Stick: EVD-16/400A16MN -15- www.eurovideo-cctv.com... -
Page 16: Menu
Apply Language Auto Delete Mode Basic System Date Format Disk Format Time/DST Set Password Change Video Type Client Account System ID Live Resolution Program Update User Name Sensor New Password P.T.Z Setup Confirm PW P.T.Z Controller Apply EVD-16/400A16MN -16- www.eurovideo-cctv.com... - Page 17 DSL PW DVR Port Web Port E-Mail Registration Event E-Mail Out Video Loss Alarm Beep Out Motion Alarm Out Power Loss Apply Search Menu Date/Time Event Search Calendar Preview Internal Backup External Power Power Record Operation Client Event EVD-16/400A16MN -17- www.eurovideo-cctv.com...
-
Page 18: Main Menu
: Bright, Saturation, Contrast, Hue, default Please use UP( ) / DOWN( ) or Numeric buttons on the front panel to move to next menu. To move to the submenu, use the “SELECT” button. It will applied instantly without “Apply”. EVD-16/400A16MN -18- www.eurovideo-cctv.com... -
Page 19: Camera Covert
Camera title can be written on the screen in both System(DVR) and Client(Network). It will be available up to 30 characters, if the monitor couldn’t show it in 1 line, it will be shown as ___ …. For example, ‘FIRST MEETING ROOM’ -> ‘FIRST MEETIN…’ EVD-16/400A16MN -19- www.eurovideo-cctv.com... - Page 20 ‘Motion’ event channel, please set as ‘Motion’ in the ‘Mode’ section then, select duration. Spot Mode is available from ‘Single/Quad/9Channel/16Channel/Alarm/Motion/Audio. - OSD Setting User can select OSD On/Off, Time and details for Event on/off, Camera Name and Blending as well. New setting value will be applied instantly without pressing “Apply”. EVD-16/400A16MN -20- www.eurovideo-cctv.com...
- Page 21 If any setting value is changed, “Apply” is required to save the new value. User can simply save new value pressing “Apply” once in one sub menu. Camera Setting & OSD Setting doesn’t need to be pressed “ Apply”. EVD-16/400A16MN -21- www.eurovideo-cctv.com...
-
Page 22: Recording
As the system support “Pre recording” function, user can select frame rate and Duration as well. -Post Duration After event occurred, it sets how long the recording continues. The value is selectable among 5/ 30/ 60/ 90/ 120/ 150/ 180/ 210/ 240 sec. -Quality EVD-16/400A16MN -22- www.eurovideo-cctv.com... - Page 23 It executes the recording when sensor is taken. How to set is same as Normal. -Motion It executes the recording when motion is captured. User can select Recording Frame and Audio On/Off, same as Normal Alarm recording. Moreover, Motion Sensitivity and Motion Region available. EVD-16/400A16MN -23- www.eurovideo-cctv.com...
-
Page 24: Schedule Recording
When you record the camera image with the motion recording mode, the data file will be saved depending on the motion sensitivity. So, higher caution is required to apply the sensitivity to the actual recording. - Schedule recording It executes the recording as per the programmed time table. EVD-16/400A16MN -24- www.eurovideo-cctv.com... - Page 25 “SEL” button is used for selecting relevant time and day. Arrow Key will be used for movement. - Audio Event 16 of Audio Inputs and 1 of Output are available. User can select Fps, Audio On/Off, Recording Quality in the Audio Event menu. EVD-16/400A16MN -25- www.eurovideo-cctv.com...
-
Page 26: System
Event, Time Lapse ) If Normal is 1 priority, the recording is carried out as per normal recording’s setup value. System - Basic User can set Language, Auto Delete Mode, Date Format, Time/DST Set, Video Type, System ID, Live EVD-16/400A16MN -26- www.eurovideo-cctv.com... -
Page 27: Date Format
& time on virtual keyboard, “Apply” is required to be applied. DST Set It will be available either by Day or Date. When user press ‘User Define’, available country will be shown. Then, select Start & End Time and EVD-16/400A16MN -27- www.eurovideo-cctv.com... - Page 28 2. Type the DVR ID on remote control according to DVR ID (two digits for example: 01) Push the ID button on the remote control to store the ID , the LED will be blink three times for acknoledge. EVD-16/400A16MN -28- www.eurovideo-cctv.com...
-
Page 29: Disk Format
IP & Mac address as well. - Disk Format User can format the HDD disk (Internal and External as well) here, and if there is no device to format, the system will show you as ‘Not Found’ as above image. EVD-16/400A16MN -29- www.eurovideo-cctv.com... -
Page 30: Password Change
User 1), there will be shown ‘User Name’, ‘New Password’, ‘Confirm PW’ section to be registered. User ID & Password has to be registered at the system first to connect with a ‘user level’ . But, administrator can access without registering. EVD-16/400A16MN -30- www.eurovideo-cctv.com... -
Page 31: Program Update
KINGSTONE 2GB, A-DATA 2GB, IMATION 2GB, SANDISK 1GB, SANDISK 512MB, MARUZEN 1GB 3. For system stability, please off 1) recording 2) playback 3) network connection during upgrading. 4. After updating program, reboot should be required. - Sensor EVD-16/400A16MN -31- www.eurovideo-cctv.com... -
Page 32: Network
When user is using the fixed IP, each address is required to be filled out as per network environment. In fixed IP environment, no need to change DVR & Web Server Port. As per DVR & Web server port, please refer Appendix 4. EVD-16/400A16MN -32- www.eurovideo-cctv.com... - Page 33 DVR. After filling the blank, please select ‘DDNS Status Check’ and if it shows ‘DDNS Status Check OK’, you will be successfully connect the network through the domain. -IP Set If user is on the condition of “Dynamic IP or Non-Dynamic IP(Fixed IP), the following will be shown. EVD-16/400A16MN -33- www.eurovideo-cctv.com...
-
Page 34: Event
2. IP & Gateway in the system should be set up first . E-MAIL Report is available among Daily/ Weekly/ Immediately. Daily report will be done 00(H):00(M) each day and weekly report will be done 00(H):00(M) on Sunday. EVD-16/400A16MN -34- www.eurovideo-cctv.com... -
Page 35: Search
If you select “Date/Time”, the following window will be shown. The (▲),(▼) buttons for selecting each clause. When you set the specific time/date and then press “Play” button, which execute the playback. User can change channel division and perform Pause, playback(4steps), reverse(3steps). EVD-16/400A16MN -35- www.eurovideo-cctv.com... -
Page 36: Calendar Search
The date which has recorded data is displayed in a white color . you can select the date in Calendar as using arrow buttons. And if you select the date, It will be displayed the sub menu of the hour and minute as the below. EVD-16/400A16MN -36- www.eurovideo-cctv.com... - Page 37 The minutes which have recorded data will be displayed as the color bar of each event and if the minutes which user wants to play is selected, the playback is operated. EVD-16/400A16MN -37- www.eurovideo-cctv.com...
-
Page 38: S E A R C
Before user searches recorded data on the calendar menu, user can preview the recorded data behind window on the screen after pressing “Zoom” button in minute of Calendar Search. In addition, user can choose each minute to preview. - Back Up EVD-16/400A16MN -38- www.eurovideo-cctv.com... - Page 39 * Note :Highly recommended that network & playback would be off to speed it up during downloading to internal DVD/CD-R disk. 2). EXTERNAL When Memory stick connects USB port, the icon will be shown at the bottom of Monitor. Backup Device USB memory stick(thumbs drive) is available. EVD-16/400A16MN -39- www.eurovideo-cctv.com...
- Page 40 Pressing “menu” button > Multi tasking function) “Exclusive” allows all cameras to be selected and recorded. * PC Playback 1. Insert USB device 2. Folders & Files on device: download, bkplay48, autorun,client48.cab, client.htm, index.htm, tagscrip.js 3. Double Click “bkplay48” EVD-16/400A16MN -40- www.eurovideo-cctv.com...
-
Page 41: Log
Client : R_Login, R_Logout, R_Logfail, R_Play, R_Transfer, R_Rec on, R_Rec off, R_Upgrade Event : Alarm, Motion, Audio, Videoloss, Email_fail 5. CLIENT PROGRAM 5-1. Network Connection Minimum PC specification CPU : Core 2 Duo 1.8GHz, Graphic : 256MB EVD-16/400A16MN -41- www.eurovideo-cctv.com... - Page 42 “Active X control” has been done or one installed DVR is higher version than PC Client. Then, select “Yes”. 2) IP Insertion through Network Installation - User can also simply connect network via Network Installation(Product CD) EVD-16/400A16MN -42- www.eurovideo-cctv.com...
- Page 43 Live on/off : Live monitoring will be started automatically when you connect network. Channel Division (1, 4, 6, 7, 8, 9, 10, 13, 16) : It is available during monitoring or playback with right buttons on the screen. EVD-16/400A16MN -43- www.eurovideo-cctv.com...
- Page 44 User’s Manual 1) Single 2) Multi Full Screen on/ off The small pop-up box is shown when user change to Full screen or point below parts on the screen, and it will be disappeared after 4 seconds. EVD-16/400A16MN -44- www.eurovideo-cctv.com...
- Page 45 User’s Manual OSD on/off : (SMART)ARRANGE on/off : When Channel direction is mixed on the screen, it makes the camera channel in order. Image Save / Load EVD-16/400A16MN -45- www.eurovideo-cctv.com...
- Page 46 ※ Microphone : It is used for transmitting sound to System through microphone. Quit (Stop Client program) Remote search Search (Date/Time/Event/Calender), Backup(Remote Backup), Log(Remote Log) are available. 1) SEARCH Remote search – Date/Time - Remote search – Event EVD-16/400A16MN -46- www.eurovideo-cctv.com...
- Page 47 Normal Recording) 2) Click the point which user want to playback on the blue bar then the red line will be dragged to the point. Then click the “Play” button for Remote Playback. - Select Channel : EVD-16/400A16MN -47- www.eurovideo-cctv.com...
- Page 48 “Backup” button to make backup data. If user select one of the lists, then “Calculate” button will be activated. Then, press “Calculate” to check the data size and press “Backup” finally. - Remote backup – Calendar Start EVD-16/400A16MN -48- www.eurovideo-cctv.com...
- Page 49 2) Click the point which user want to playback on the blue bar then the red line will be dragged to the point. Then click the “Play” button for Remote backup. Please, click “Next” button to set “End Backup SET” as follows. The procedure is same as “Start Backup Set”. EVD-16/400A16MN -49- www.eurovideo-cctv.com...
- Page 50 Operation : Play start, Play stop, HDD format, Menu set Client : R_Login, R_Logout, R_Logfail, R_Play, R_Transfer, R_Rec on, R_Rec off, R_Upgrade Event : Alarm, Motion, Audio, Videoloss, Email_fail - “System Info” of the Remote Log - “Status Info” of the Remote Log EVD-16/400A16MN -50- www.eurovideo-cctv.com...
- Page 51 User can see Mac address / System version information. It is shown status of both HDD disk and recording mode by channel. Remote Setup : Checking settings menu (Same as DVR) 1) Display – Camera Setting – Camera Covert EVD-16/400A16MN -51- www.eurovideo-cctv.com...
-
Page 52: Camera Name
Upto 32 Characters are available for Camera Name. - Spot Setting 1) Please set “Mode” first then click “OK” 2) Select Duration using the white bar, user can select/unselect all at the same time. – OSD On/Off EVD-16/400A16MN -52- www.eurovideo-cctv.com... - Page 53 User’s Manual 2) Recording – Global – Normal User can change Normal Recording Rate after moving with pressing the bar and select Audio ON/ OFF in each channel. EVD-16/400A16MN -53- www.eurovideo-cctv.com...
- Page 54 User’s Manual – Alarm User can change Alarm Recording Rate after moving with pressing the bar and select Audio ON/ OFF in each channel. EVD-16/400A16MN -54- www.eurovideo-cctv.com...
- Page 55 The motion area will be displayed when user select the Region button. The detection area is divided 11x8 cells and default is all-cells activation mode. The transparent cells are disabled area but, it can be changed able area after clicking on it. EVD-16/400A16MN -55- www.eurovideo-cctv.com...
- Page 56 User can change schedule Recording Rate after moving with pressing the bar and select Audio ON/ OFF in each channel. The calendar will be displayed when user select the Set button and User can select / unselect day and time after clicking on it. EVD-16/400A16MN -56- www.eurovideo-cctv.com...
- Page 57 User can change Audio event recording Rate after moving with pressing the bar and select Audio ON/ OFF in each channel. User can change Audio event sensitivity after moving with pressing the bar in each channel. The Audio of Audio event can be activated after selecting on / off. EVD-16/400A16MN -57- www.eurovideo-cctv.com...
- Page 58 User’s Manual – Time Lapse User can select Time lapse Video and Audio ON/ OFF in each channel. User can change Time lapse Days after moving with pressing the bar. EVD-16/400A16MN -58- www.eurovideo-cctv.com...
- Page 59 User can select recording priority among 5 kinds of recording methods. If Normal recording is priority, the recording is proceeded as per normal recording setup value. 3) System – Basic User can select language, Date format, Video code, System ID and Resolution. EVD-16/400A16MN -59- www.eurovideo-cctv.com...
-
Page 60: Auto Delete Mode
Administrator can add, edit and delete user account in Client account after clicking blank box. – Sensor User can select None, N.C and N.O in each Sensor. – Auto Delete Mode Auto delete mode will remain recorded data only for specified days and the rest days will be erased automatically. EVD-16/400A16MN -60- www.eurovideo-cctv.com... - Page 61 User’s Manual – PTZ Setup User can input PTZ camera name and can select available protocol in each channel. User can select available Baud rate of PTZ camera in each channel. EVD-16/400A16MN -61- www.eurovideo-cctv.com...
-
Page 62: Ptz Controller
User can select PTZ Controller ID from 1 to 5 and increase/decrease after pressing button +/-1 or moving with pressing the bar up to number 255 and select available Protocol. User can select PTZ Controller Baud rate from 2400bps to 19200bps. EVD-16/400A16MN -62- www.eurovideo-cctv.com... - Page 63 User’s Manual – DST User can setup Daylight Saving Time in DST Setup. User can select available country default or can set it up individually. EVD-16/400A16MN -63- www.eurovideo-cctv.com...
-
Page 64: Email Registration
User’s Manual 4) Event - Email Registration User can register e-mail address up to 3 people and select report period. - Email Out User can select each event On/Off in E-mail out. - Beep Out - Alarm Out EVD-16/400A16MN -64- www.eurovideo-cctv.com... -
Page 65: Local Search
User can select specific Date and Time in order to playback with pressing the Play button. User can select any event in order to playback with selecting one in the list of events and pressing the play button. EVD-16/400A16MN -65- www.eurovideo-cctv.com... - Page 66 User’s Manual – Calendar – Calendar Result User can select recorded date, time, hour, minute and playback after pressing Play button in Calendar. Local Log EVD-16/400A16MN -66- www.eurovideo-cctv.com...
- Page 67 User’s Manual ※ Local Log List Program start, Program end / Login, Logout, Log fail / Local play start, Local play stop Local setup, Save image EVD-16/400A16MN -67- www.eurovideo-cctv.com...
- Page 68 User’s Manual PTZ Setup It is possible to control Pan/Tilt and Zoom/focus in Live. -Pan/Tilt control - Zoom/Focus control It, Using arrow key, controls the Pan/Tilt and Zoom/Focus. EVD-16/400A16MN -68- www.eurovideo-cctv.com...
-
Page 69: Firmware Upgrade
User can see the display ‘Firmware upgrade success!’ after upgrading it successfully. User have to press OK button to reboot the DVR since the firmware will be applied completely to the system after rebooting it. EVD-16/400A16MN -69- www.eurovideo-cctv.com... -
Page 70: Q & A
OSD is showing several status during playback. If the detail items is not specified on the “Local Setup”, there is no response even if pushing the OSD button during playback. Try it after selecting required OSD menu on the Local Set-up . EVD-16/400A16MN -70- www.eurovideo-cctv.com... - Page 71 A2 : Please, go to control panel -> internet options -> security -> select Customer Level. Go to ActiveX controls and plug-ins -> Automatic prompting for ActiveX Controls => Disable" Go to Download unsigned ActiveX controls => Prompt" Go to Miscellaneous -> Allow script-initiated windows without size or position constraints" => Enable" EVD-16/400A16MN -71- www.eurovideo-cctv.com...
-
Page 72: Appendix 2
2. Inner Circuit for Sensor Input The inner circuit of Mpeg 4 DVR is as follows, 12V DC 5V DC 2.2k 2.2k Internal Check Point 0.1uF PC817 SENSOR IN Outlet Point PC817 : Photo Coupler The Specification of PC817 EVD-16/400A16MN -72- www.eurovideo-cctv.com... - Page 73 V CE = 5V, I C = teristics Cut-off frequency 2mA, R L = 100 W, - Rise µ s time Response V CE = 2V, I C = time 2mA, R L = 100 Fall µ s time EVD-16/400A16MN -73- www.eurovideo-cctv.com...
- Page 74 User’s Manual 3. SENSOR Install Processing Please refer the below block diagram. SENSOR 12V DC ?? V DC 2.2k 3.3k Or 10k PC817 SENSOR IN Outlet Point EVD-16/400A16MN -74- www.eurovideo-cctv.com...
-
Page 75: Appendix 3
INSTALLING GRYPES WEB CLIENT ON WINDOW XP/2000 & WINDOW VISTA SERVICE PACK 2. 1) Security Setup > Window XP / 2000 > Window Vista Tools-> Internet Options-> Security Tools-> Internet Options-> Security -> Select “Customer Level” -> Unselect square box -> Select “Customer Level” EVD-16/400A16MN -75- www.eurovideo-cctv.com... - Page 76 User’s Manual Select “ Allow script-initiated windows without Size or position constraints” -> Enable. Select “ Download unsigned Active X controls”-> Prompt EVD-16/400A16MN -76- www.eurovideo-cctv.com...
- Page 77 User’s Manual Select “ Automatic Prompting for Active X controls”-> Disable 2) Connection Click here as described EVD-16/400A16MN -77- www.eurovideo-cctv.com...
- Page 78 User’s Manual Select “ Temporary Allow Pop-ups” Click “ To help protect security, Internet Explorer stopped this site from installing an Active X control on your computer. Click here for options…” Select “Install Active X Control “ EVD-16/400A16MN -78- www.eurovideo-cctv.com...
- Page 79 User’s Manual Select “Install” and then ‘Log-In’ box will be shown. EVD-16/400A16MN -79- www.eurovideo-cctv.com...
-
Page 80: Appendix 4
User’s Manual Appendix 3 DYNAMIC IP ( Supporting DDNS Server) 1. visit www.ddns-dvr.com to get the DDNS user ID & PW as well as Host name. 2. Click to create / set account of “Dynamic DNS”. EVD-16/400A16MN -80- www.eurovideo-cctv.com... - Page 81 User’s Manual 3. Select “Create Account” menu. EVD-16/400A16MN -81- www.eurovideo-cctv.com...
- Page 82 User’s Manual 4. Create Account. Please set up all blank in order to create new account. ID & Password will be emailed you when the account is created well. EVD-16/400A16MN -82- www.eurovideo-cctv.com...
-
Page 83: Appendix 5
Change DDNS to ON -> Input User ID -> Input User PW -> Input Domain -> Click “DDNS Status Check” -> if it is “ok” -> Click “Apply” > Note ; In DDNS Set, User have to type Domain Name “dvr-1” EVD-16/400A16MN -83- www.eurovideo-cctv.com... - Page 84 * For more detail, please refer to relevant IP sharing manual . (3) ‘DDNS’ Setup on IP sharing router DDNS configuration is no needed in case of fixed IP. (4) To connect DVR-1 with Internet Explorer, http://dvr-1.ddns-dvr.com:9001, to connect DVR-1 with CD installer, http://dvr-1.ddns-dvr.com:9000. EVD-16/400A16MN -84- www.eurovideo-cctv.com...
- Page 85 To back up to USB HDD, the USB HDD should be formatted first on PC. We are supporting FAT32 file system of which maximum size is 30GB at one partition. Please refer to the following procedure to make a partition and format on PC. 1. Select Control panel-> administrative Tools. EVD-16/400A16MN -85- www.eurovideo-cctv.com...
- Page 86 User’s Manual 2. Select “Computer Management” 3. Select “Disk Management”. EVD-16/400A16MN -86- www.eurovideo-cctv.com...
- Page 87 User’s Manual 4. Click right mouse button and select “New Partition”. 5. Follow “New Partition Wizard” procedure as below. EVD-16/400A16MN -87- www.eurovideo-cctv.com...
- Page 88 User’s Manual 7. Maximum is 30GB at FAT32 file format. EVD-16/400A16MN -88- www.eurovideo-cctv.com...
- Page 89 User’s Manual EVD-16/400A16MN -89- www.eurovideo-cctv.com...
- Page 90 User’s Manual 10. At this stage, New Partition has been made. 11.Check New partition was created correctly.(Format will be executed automatically) EVD-16/400A16MN -90- www.eurovideo-cctv.com...
- Page 91 User’s Manual 12. Check New Partition was created correctly EVD-16/400A16MN -91- www.eurovideo-cctv.com...
- Page 92 User’s Manual Appendix 6 SPECIFICATION 1) REALTIME Recorder EVD-16/400A16MN -92- www.eurovideo-cctv.com...
- Page 93 User’s Manual *Design and product specifications subject to change without notice* 2) 240/200fps Recorder EVD-16/400A16MN -93- www.eurovideo-cctv.com...
-
Page 94: Product Warranty
All goods returned for repair should be clearly identified with the assigned CA or RA number and requiring warranty repair shall be sent freight prepaid to us or round trip fare will be charge to the dealer if the warranty is expired. EVD-16/400A16MN -94- www.eurovideo-cctv.com...
Need help?
Do you have a question about the EVD-16/400A16MN and is the answer not in the manual?
Questions and answers