Quantum PLUS – Installation and User manual INSTALLATION/OPERATION EVD-16/400A16HC REAL TIME DIGITAL VIDEO RECORDER (H.264 – 4/8/16 CHANNEL)
Page 2
Manufacturer will not be liable for damage which is directly or indirectly due to errors, incompleteness, or discrepancies the manual and the product described. All names used in this manual for hardware and software are very probably Trade marks www.eurovideo-cctv.com EVD-16/400A16HC...
Page 3
Installation and Operation registered trade marks and must be treated as such. www.eurovideo-cctv.com EVD-16/400A16HC...
The device supplied with this manual is according to the EC, EMC Directive, 89/336/EEC & LVD 73/23/EEC Standard used for showing compliance with the essential requirements of the device: EN 55022 EN 61000-3-2 EN 61000-3-3 EN 50130-4 EN 55024 LVD: EN60950-1 ELECTRICAL SAFETY Explanation of electrical safety symbols www.eurovideo-cctv.com EVD-16/400A16HC...
Remote Control OSD Description ( On Screen Display ) Menu Tree Default Password Main Menu Menu Navigation DISPLAY Camera Setting Camera Covert Spot Setting OSD on/off Event Clear Apply RECORDING Global Normal Alarm Recording Motion Recording Schedule Recording www.eurovideo-cctv.com EVD-16/400A16HC...
Page 6
DDNS IP SET LIVE EVENT NOTIFICATION E-Mail Registration SMTP Mode Email Out Beep/Alarm Out SEARCHING VIDEO FOOTAGE Date / Time Search EVENT Calendar Search DOWNLOADING EVIDENCE CLIENT SOFTWARE / IE Viewer Minimum PC Specification Explanation of Screen buttons www.eurovideo-cctv.com EVD-16/400A16HC...
Page 7
APPENDIX 3 – DYNAMIC IP (Supporting DDNS) APPENDIX 4 – Setup for DVR port / Web server port using IP Sharing router ( Port Forwarding) APPENDIX 5 – Making a partition on an External USB hard drive APPENDIX 6 – System Specification www.eurovideo-cctv.com EVD-16/400A16HC...
For the safety and proper use, The DVR is marked with various symbols. Please read these to prevent injury of financial loss. INSTALLATION SITE Ensure installation position is level, secure and adequately ventilated. Avoid installing close to sources of humidity or water. www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation CONTENTS OF PACKAGING Digital Video Recorder System Please read this manual before using Power Remote Controller Battery User Manual Cable www.eurovideo-cctv.com EVD-16/400A16HC...
- Full channel real-time monitoring - Live monitoring, recording, playback, backup, remote access simultaneously - Multi channel playback - Variable events notification to e-mail, buzzer or PC Client system - PTZ & PTZ Controller is available by RS485 www.eurovideo-cctv.com EVD-16/400A16HC...
- USB2.0 connector, for downloading to USB pens / drives (plus upgrading firmware ) (3) POWER BUTTON - System Power On/Off (4) NUMERIC & CHARACTER - Input for numeric’s & letters (5) MENU - Displays the menu on the screen (6) SEARCH - Entering search mode www.eurovideo-cctv.com EVD-16/400A16HC...
Page 12
- Moves the cursor while in menu mode (13) SELECT - Menu selection (14) Camera Selection - Camera Channel section (15) Screen Split - Selection of multi screen functions (16) PTZ - To control P/T/Z, press this button to browse virtual key on screen. www.eurovideo-cctv.com EVD-16/400A16HC...
- 16/8/4 Audio input through line (4) AUDIO OUTPUT - 1 Audio output (5) RS232 - 1 Serial Communication (6) Network Port (RJ-45) - Available to monitor live screen and recorded data on the HDD through Internet or LAN www.eurovideo-cctv.com EVD-16/400A16HC...
Page 14
- 1 Serial Communication for Pan / Tilt Camera - 1 Serial Communication for P/T/Z Control Keyboard (10) AC POWER - AC 110~240 V (Free Voltage) ATTENTION When the video format is changed, the system should be re-booted The video format should be selected before booting www.eurovideo-cctv.com EVD-16/400A16HC...
: 1.7GB is used out of 298.0GB -Event(i.e. Power Fail ) : Power Fail, Video loss, etc will be shown when it is occurred. -Network connection : It is shown that admin or user is connected. -Date/Time *Others : -Backup -Mute -USB Stick: www.eurovideo-cctv.com EVD-16/400A16HC...
Priority Apply Language Auto Delete Mode Date Format Basic System Time/DST Set Disk Format Video Type Password Change System ID Client Account Program Update Live Resolution Sensor User Name PTZ Setup New Password PTZ Controller Confirm PW www.eurovideo-cctv.com EVD-16/400A16HC Apply...
Page 19
DSL PW LIVE DVR Port Web Port Apply Video Loss E-Mail Registration Event SMTP Mode Alarm E-Mail Out Motion Beep Out Power Loss Alarm Out Apply Search Menu Date/Time Search Event Calendar Backup Power Record Operation Client Event www.eurovideo-cctv.com EVD-16/400A16HC...
Client Program / IE When using the supplied browser software the following password will be required. User ID is “admin” (not case sensitive). Password is “00000000” i.e. 8x Zero’s (Admin ID cannot be changed, as this is the full administrator ID) www.eurovideo-cctv.com EVD-16/400A16HC...
Page 21
Installation and Operation www.eurovideo-cctv.com EVD-16/400A16HC...
-Front Panel or IR remote control All menus are navigated around using the left / Right / Up / Down and the Select button. -MOUSE(USB 2.0) Via USB2.0 Mouse, please press right button to launch all menu option. www.eurovideo-cctv.com EVD-16/400A16HC...
Each camera can be titled using the Alphanumeric buttons on the front panel or Mouse. It will be available upto 32 characters, if the monitor couldn’t show it in 1 line, it will be shown as _... For example, ‘FIRST MEETING ROOM’ -> ‘FIRST MEETIN…’ www.eurovideo-cctv.com EVD-16/400A16HC...
‘Motion’ event channel, please set as ‘Motion’ in the ‘Mode’ section then, select duration. Spot Mode is available from ‘Single/Quad/9Channel/16Channel/Alarm/Motion/Audio. OSD Setting OSD Setting: Selecting whether the time and date etc is shown on the screen or not. New setting value will be applied instantly without pressing “Apply”. www.eurovideo-cctv.com EVD-16/400A16HC...
Pre FPS/Pre Duration/Post Duration are recommended to set active to get data just before event occurs. Post Duration are selectable. -Pre FPS : 0/1/3/5 fps -Pre Duration & Post Duration : 5/30/60/90/120/150/180/210/240 sec. Quality can be set among High/Middle/Low. These settings are applied to all www.eurovideo-cctv.com EVD-16/400A16HC...
(totally 480fps), 720x 240 is 15 fps each (Totally 240fps), 720x480 is 7.5 fps each(Totally 120fps). Individual frame rate control is available and selecting audio on/off individually as well. Figures can be changed pushing the “↑,↓” button. Alarm www.eurovideo-cctv.com EVD-16/400A16HC...
User can select Recording Frame and Audio On/Off, same as Normal and Alarm recording. Moreover, Motion Sensitivity Motion Region available. Motion Sensitivity It consists of High, Mid, Low. Motion Region The following will be displayed when user selects the menu. www.eurovideo-cctv.com EVD-16/400A16HC...
The above shows available frame rate each channel. In 360x288 mode, 25 fps is available each channel (totally 400fps), 720x 288 is 12.5 fps each (totally 200fps), and 720x576 is 6.25fps (totally 100fps) . Individual frame rate control is available as above image. Setting values will be changed pushing the “↑,↓” button www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation “SEL” button is used for selecting relevant time and day. Arrow Key will be used for movement. Audio Event 16 Audio Inputs and 1 Output are available. User can select Fps, Audio On/Off, Recording www.eurovideo-cctv.com EVD-16/400A16HC...
If recording is in Standby mode, the icon is as follows. Priority The RECORD PRIORITY allows the mixing of the various record methods to customize the individual site requirements. Recording Quality Three levels of compression: High, Mid, Low. Save and Exit www.eurovideo-cctv.com EVD-16/400A16HC...
Page 31
Installation and Operation All the values set-up will be stored and screen will step back to higher level menu.. www.eurovideo-cctv.com EVD-16/400A16HC...
Auto Delete Mode will remain recorded data only for specified days and the rest days will be erased automatically. User can select from 00days to 99days. Date Format The default is dd-mm-yyyy. The date format is available among mm-dd-yyyy / dd-mm-yyyy / yyyy-mm-dd. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 33
User can change Time for DVR and able to set DST in this menu. Time Set It is available as left image, after changing the year, date & time “Apply” is required to be applied. The default is DST OFF www.eurovideo-cctv.com EVD-16/400A16HC...
Page 34
Then, select Start & End Time and Offset as well. At last, press ‘Apply’ to save the figures. Video Type Video Type is able to set by software, it can be simply done in this menu without rebooting or initialization. The default is PAL. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 35
ID button again. The LED will flash slowly. ID Button Initialization All the menu value will be returned to the factory default. To carry out this function the system recording will have to be turned off. www.eurovideo-cctv.com EVD-16/400A16HC...
The Information Screen shows the hard disk size, current firmware revisions, IP address and MAC address Disk Format Formatting of the drive is used when new drives are installed or you need to wipe all information on the disk. www.eurovideo-cctv.com EVD-16/400A16HC...
5 can view live only. ADD NEW ACCOUNT Network users can be set up under this menu; a name and password need to be entered for each account. Once setup they will appear in the User1~5. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 38
Installation and Operation www.eurovideo-cctv.com EVD-16/400A16HC...
1GB, SANDISK 512MB, MARUZEN 1GB 3. For system stability, please off 1) recording 2) playback 3) network connection during upgrading. 4. After updating program, reboot should be required. The simplest way is press POWER button once as shown on the message. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 40
Installation and Operation www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation SENSOR The 16 alarm inputs and 1 output on the rear of the DVR can be configured to be normally open or closed. Sensor Input is selectable N.C, N.O, None. www.eurovideo-cctv.com EVD-16/400A16HC...
What this means is that the DVR does not need a Static IP address to be available for viewing remotely over the World Wide Web. Please refer to Appendixes 4 on how to set up the DDNS service. www.eurovideo-cctv.com EVD-16/400A16HC...
When a fixed IP address is being used, the Use Dynamic IP should be set to No The IP Address, Gateway and Subnet Mask need to be set, these will generally be given by the Network Manager. DSL refers to all types of Digital Subscriber Line such as ADSL and SDSL www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation It supports keep matching local time from internet to the DVR. The default is NTP OFF. www.eurovideo-cctv.com EVD-16/400A16HC...
It allows individual Live resolution regardless of System Recording and gives Quality option as well to have better network streaming. Ie) In order to get the fastest Network Live transmission, please choose ‘Resolution’ : CIF and ‘Quality’ : Low. www.eurovideo-cctv.com EVD-16/400A16HC...
Video Loss / Alarm / Motion or Power Loss. An E-mail will only be sent if the DVR is sitting on a network with access to the Internet, e.g. through a router. The e-mail addresses are set via the alphanumeric buttons on the front panel. www.eurovideo-cctv.com EVD-16/400A16HC...
In order to activate SMTP Mode, choose SMTP Mode either IP or Domain first. Then, put ID, Password, IP address, and port. Finally press “SMTP Status Check” to see whether it works. Please see the images as follows. www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation E-mail Out As well as e-mail on event activations the DVR can be set to send a report of what has happened daily / weekly or immediately. This sends a mail containing the log report. www.eurovideo-cctv.com EVD-16/400A16HC...
When an event (e.g. Video loss, Alarm, Motion or power loss) occurs the following actions can be triggered: E-mail – As described in previous section Beep – The buzzer can be sounded. Alarm out – The relay contact on the rear of the unit can be closed. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 50
Installation and Operation www.eurovideo-cctv.com EVD-16/400A16HC...
ALL – The search is for a block of video within the times defined MOTION – The search is for any motion events within the times defined ALARMS – The search is for any alarm activation within the times defined www.eurovideo-cctv.com EVD-16/400A16HC...
The year and month can be selected, this month is shown as a calendar on the screen, any day which contains recorded video will be indicated by a highlighted number in white. Move to the desired day by using the up / down / left / right buttons, Select the day by www.eurovideo-cctv.com EVD-16/400A16HC...
Page 53
Installation and Operation pressing SEL. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 54
The minutes which have recorded data will be displayed as the color bar of each event and if the minutes which user wants to play is selected, the playback is operated. Video will start playing from the selected time. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 55
Before user searches recorded data on the calendar menu, user can preview the recorded data behind window on the screen after pressing “PTZ” button in minute of Calendar Search. In addition, user can choose each minute to preview. www.eurovideo-cctv.com EVD-16/400A16HC...
USB port, when highlighted use the right arrow to toggle between the options. Device Format Format for CD/DVD-R is not needed. When using CD/DVD-R or USB, format should be done first. Type EXCLUSIVE is available for File format. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 57
Transfer. Transfer When Transfer is highlighted press SEL, the downloading will start. Percentage done during downloading will be shown. * USB compatibility: the following have been tested Lexar JumpDrive 128/256MB SanDisk Mini Cruzer 128MB www.eurovideo-cctv.com EVD-16/400A16HC...
Client : R_Login, R_Logout, R_Logfail, R_Play, R_Transfer, R_Rec on, R_Rec off, R_Upgrade Event : Alarm, Motion, Audio, Videoloss, Email_fail A total of 2500 events can be recorded the oldest being overwritten when a new one occurs, the can be viewed all together or individual types as a list. www.eurovideo-cctv.com EVD-16/400A16HC...
Follow the instructions. Once the software is loaded it will automatically run. Connection When User click the button of ‘Connection’, , of Network installation program, the IP SET window will be appeared to connect to a DVR. www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation LOG IN The following window will appear. To connect to the GDVR, types in the units IP address, DVR Port and ID & Password. Then, click “OK”, which starts the live monitoring. Explanation of Screen Buttons www.eurovideo-cctv.com EVD-16/400A16HC...
The software is best viewed on the monitor resolution, 1024 x 768. Multiscreen (1, 4, 6, 7, 8, 9, 10, 13, 16) : Multiscreen division can be done during both live and playback. As seen in picture, 1,4,6,7, 8,9,10,13,16 division are available. 1) Single 2) Multi www.eurovideo-cctv.com EVD-16/400A16HC...
Page 62
Installation and Operation Full Screen on/ off The small pop-up box is shown when user change to Full screen or point below parts on the screen, and it will be disappeared after 4 seconds. OSD on/off : www.eurovideo-cctv.com EVD-16/400A16HC...
Page 63
Installation and Operation (SMART)ARRANGE ON/OFF : When Channel direction is mixed on the screen, it makes the camera channel in order. Image Save / Load www.eurovideo-cctv.com EVD-16/400A16HC...
This Remote Search is able to play back video on the PC direct from the hard disk storage on the unit. There are 3 options for as follows. 1) Date/Time 2) Event 3) Calendar - Remote search – Date/Time - Remote search – Event www.eurovideo-cctv.com EVD-16/400A16HC...
Page 65
2) Click the point which user want to playback on the blue bar then the red line will be dragged to the point. Then click the “Play” button for Remote Playback. Or, click “Prev” to go back to previous stage. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 66
Installation and Operation Select Channel : www.eurovideo-cctv.com EVD-16/400A16HC...
Page 67
Installation and Operation User can simply include/exclude channel dependent on own query. It is available for Search, Backup and Log as well. BACK-UP - Remote backup – Date/Time - Remote backup – Event www.eurovideo-cctv.com EVD-16/400A16HC...
Page 68
1) Drag the Red line to the color bar(I.e. Blue : Normal Recording) 2) Select specific time on “Start”, then the Red line will move to the selected time. Please, click “Next” button to set “End Backup SET” as follows. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 69
Installation and Operation The backup procedure is same as Date/Time & Event backup as previous page. * “Prev” to go back to previous stage *The downloaded data is saved in as follows root. C:\Realtime www.eurovideo-cctv.com EVD-16/400A16HC...
Reocrd : Rec fail, Rec start, Rec stop, Rec error, Rec full Operation : Play start, Play stop, HDD format, Menu set Client : R_Login, R_Logout, R_Logfail, R_Play, R_Transfer, R_Rec on, R_Rec off, R_Upgrade Event : Alarm, Motion, Audio, Videoloss, Email_fail www.eurovideo-cctv.com EVD-16/400A16HC...
Page 71
Installation and Operation Info “System Info” of the Remote Log - “Status Info” of the Remote Log User can see Mac address / System version information. It is shown status of both HDD disk and recording mode by channel. www.eurovideo-cctv.com EVD-16/400A16HC...
Installation and Operation Remote Setup : Checking settings menu (Same as DVR) 1) Display – Camera Setting – Camera Covert www.eurovideo-cctv.com EVD-16/400A16HC...
Page 73
Installation and Operation Camera Covert is only applied for System Live and User login in ‘Realtime’. - Camera Name Upto 32 Characters are available for Camera Name. - Spot Setting Multi Channel Spot www.eurovideo-cctv.com EVD-16/400A16HC...
Page 74
Installation and Operation 1) Please set “Mode” first then click “OK” 2) Select Duration using the white bar, user can select/unselect all simultaneously. Event Spot OSD On/Off www.eurovideo-cctv.com EVD-16/400A16HC...
Page 75
Installation and Operation Recording Global Normal User can set Normal Recording Resolution, Recording Rate and Audio On/Off. -Resolution www.eurovideo-cctv.com EVD-16/400A16HC...
Page 76
Installation and Operation -Rate -Audio Alarm Alarm setting is same as Normal(Page67) Motion www.eurovideo-cctv.com EVD-16/400A16HC...
Page 78
The motion area will be displayed when user click the “Region” button. The detection area is divided 11x8 cells and default is all-cells activation mode. The transparent cells are disabled area but, it can be changed able area after clicking on it. Schedule -Resolution -Rate -Audio Set Schedule www.eurovideo-cctv.com EVD-16/400A16HC...
Page 79
Installation and Operation Audio Event Please refer previous page to see how to set. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 80
Installation and Operation Time Lapse -Resolution -Video -Audio -Days Priority www.eurovideo-cctv.com EVD-16/400A16HC...
Page 81
Installation and Operation System Basic www.eurovideo-cctv.com EVD-16/400A16HC...
Page 82
Installation and Operation Client Account Auto Delete Mode www.eurovideo-cctv.com EVD-16/400A16HC...
Page 83
Installation and Operation PTZ Setup www.eurovideo-cctv.com EVD-16/400A16HC...
Page 84
Installation and Operation PTZ Controller www.eurovideo-cctv.com EVD-16/400A16HC...
User can select Firmware Upgrade menu, if new version exits in C:/Realtime/Upgrade fold, ‘New program found!’ and if not ‘New program not found!’ message will be displayed. User can proceed upgrading after pressing OK button and select each firmware to upgrade it to the system. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 96
Quit (Stop Client program) APPENDIX 1 ALARM SENSOR INSTALLATION 1. Components 1) External Sensor: 1 2) DVR System: 1 2. Inner Circuit for Sensor Input The inner circuit of Quantum DVR is as follows, www.eurovideo-cctv.com EVD-16/400A16HC...
Page 97
Installation and Operation PC817 : Photo Coupler The Specification of PC817 Absolute Maximum Ratings Parameter Symbol Rating Unit Forward current *1Peak forward current I FM Input Reverse voltage Power dissipation Output Collector-emitter voltage V CEO www.eurovideo-cctv.com EVD-16/400A16HC...
Page 98
V CE = 5V, I C = Cut-off frequency 2mA, R L = 100 W, -3dB Rise µ s V CE = 2V, I C = time Response 2mA, R L = 100 time Fall Ω µ s time www.eurovideo-cctv.com EVD-16/400A16HC...
Page 99
Installation and Operation 1. SENSOR Install Processing Please refer the below block diagram SENSOR 12V DC ?? V DC 2.2k 3.3k Or 10k PC817 SENSOR IN Outlet Point www.eurovideo-cctv.com EVD-16/400A16HC...
Page 100
> Window XP / 2000 > Window Vista Tools-> Internet Options-> Security Tools-> Internet Options-> Security -> Select “Customer Level” -> Unselect square box -> Select “Customer Level” Select “ Allow script-initiated windows Without Size or position constraints”-> Enable. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 101
Installation and Operation Select “ Download unsigned Active X Controls”-> Prompt Select “ Automatic Prompting for Active X Controls”-> Disable www.eurovideo-cctv.com EVD-16/400A16HC...
Page 102
Installation and Operation 2) Connection Click here as described Select “ Temporary Allow Pop-ups” www.eurovideo-cctv.com EVD-16/400A16HC...
Page 103
Click “ To help protect security, Internet Explorer stopped this site from installing an Active X control on your computer. Click here for options…” Select “Install Active X Control “ Select “Install” and then ‘Log-In’ box will be shown. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 104
Installation and Operation APPENDIX 3 DYNAMIC IP (Supporting DDNS Server) 1. Visit www.ddns-dvr.Com to get the DDNS user ID & PW as well as Host name. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 105
Installation and Operation 2. Click to create / set account of “Dynamic DNS”. 3. Select “Create Account” menu. 4. Create Account. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 106
DDNS server as free of charge) * Set up DDNS Change DDNS to ON -> Input User ID -> Input User PW -> Input Domain -> Click “DDNS Status Check” -> if it is “ok” -> Click “Apply” www.eurovideo-cctv.com EVD-16/400A16HC...
Page 107
Installation and Operation > Note ; In DDNS Set, User have to type Domain Name . www.eurovideo-cctv.com EVD-16/400A16HC...
Page 108
* For more detail, please refer to relevant IP sharing manual. (3) ‘DDNS’ Setup on IP sharing router DDNS configuration is not needed in case of fixed IP. (4) To connect DVR-1 with Internet Explorer, http://dvr-1.ddns-dvr.com:7001, to connect DVR-1 with CD installer, http://dvr-1.ddns-dvr.com:7000. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 109
To back up to USB HDD, the USB HDD should be formatted first on PC. The unit supports the FAT32 file system, of which maximum size is 30GB for one partition. Please refer to the following procedure to make a partition and format on PC. 1. Select Control panel-> administrative Tools. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 111
Installation and Operation 4. Click right mouse button and select “New Partition”. 5. Follow “New Partition Wizard” procedure as below. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 112
Installation and Operation 6. Select the Primary partition option. 7. Maximum is 30GB at FAT32 file format. www.eurovideo-cctv.com EVD-16/400A16HC...
Page 113
Installation and Operation 8. Assign drive letter 9. Format the partition to FAT32 www.eurovideo-cctv.com EVD-16/400A16HC...
Page 114
Installation and Operation 10. At this stage, New Partition has been made. 11.Check New partition was created correctly.(Format will run automatically) www.eurovideo-cctv.com EVD-16/400A16HC...
Page 115
Installation and Operation 12. Check New Partition was created correctly www.eurovideo-cctv.com EVD-16/400A16HC...
Page 116
Installation and Operation APPENDIX 6 www.eurovideo-cctv.com EVD-16/400A16HC...
Need help?
Do you have a question about the EVD-16/400A16HC and is the answer not in the manual?
Questions and answers