Condensed Status Setup - Siemens Sitrans LR250 Instruction Manual

3.5.8. Acknowledge Status
Acknowledges the status of the Maintenance limits.
In SIMATIC PDM, open the menu View – Device Status, click on the
Maintenance tab and check the Sensor Lifetime Status window.
3.5.9. Acknowledge
Acknowledges the current limit status.
To acknowledge an alert via SIMATIC PDM:
a) Open the menu View – Device Status and click on the Maintenance tab.
b) In the Sensor Lifetime section click on Acknowledge Warnings.
To acknowledge an alert via the handheld programmer:
a) Press RIGHT arrow
Mode.
b) Press RIGHT arrow

3.6. Condensed Status Setup

When Condensed Status Mode (3.6. 1 .) is enabled, you can select the level of severity
of errors, and tailor a device response appropriate for your particular process.
• In Event Index (3.7.1.) you can select a particular event or error by means of its
index number.
• In Event Status (3.7.2.) you can assign a status to the selected event.
• In Event Diagnosis (3.7.3.) you can assign a diagnosis to the selected event.
3.6.1. Condensed Status Mode
Note:
cannot be changed.
Options
Select Yes or No to enable/disable Condensed Mode.
3.6.2. Features supported (View only)
Features supported are:
• Condensed Diagnostics
• Extended Diagnostics
• Application Relationships
3.6.3. Features enabled (View only)
Lists those features that have been enabled.
7ML19985JF02 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL
twice to open parameter view and activate Edit
to acknowledge the alert.
When cyclic communication is in progress, Condensed Status Mode
No (disabled)
*
Yes (enabled)
Page 85