Data Logger - GE C30 Instruction Manual

6.4 RECORDS
PATH: ACTUAL VALUES
 DATA LOGGER

The
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the
COMMANDS
6
6-14
 
RECORDS

DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It will be static until the log
 menu for clearing data logger records.
CLEAR RECORDS
C30 Controller System
6 ACTUAL VALUES
6.4.3 DATA LOGGER
represents the time the
NEWEST SAMPLE TIME
GE Multilin