GE C30 Instruction Manual page 115

4 HUMAN INTERFACES 4.3 FACEPLATE INTERFACE
password has been entered via the any external communications interface three times within a 3-minute time span, the
FlexLogic operand is set to On and the C30 does not allow settings or command access via the
REMOTE ACCESS DENIED " "
any external communications interface for the next five minutes.
In the event that an incorrect Command or Setting password has been entered via the any external communications inter-
face three times within a three-minute time span, the FlexLogic operand is set to "On" and the
REMOTE ACCESS DENIED
C30 does not allow Settings or Command access via the any external communications interface for the next ten minutes.
The FlexLogic operand is set to "Off" after the expiration of the ten-minute timeout.
REMOTE ACCESS DENIED
4
GE Multilin C30 Controller System 4-29