Settings; Overview Of Settings - Grundfos magna3 Installation And Operating Instructions Manual

7. Settings

7.1 Overview of settings

All settings can be made on the pump control panel or with Grundfos GO Remote.
Menu
Setpoint
Operating mode
Control mode
FLOW
LIMIT
Automatic Night Setback
Relay outputs
Setpoint influence
Bus communication
General settings
22
Submenu
• Normal
• Stop
• Min.
• Max.
• AUTO
ADAPT
• FLOW
ADAPT
• Prop. press.
• Const. press.
• Const. temp.
• Differential temperature
• Constant curve
• Set FLOW
LIMIT
• Not active
• Active
• Relay output 1
• Relay output 2
• External setpoint function
• Temperature influence
• Pump number
• Language
• Set date and time
• Units
• Enable/disable settings
• Delete history
• Define Home display
• Display brightness
• Return to factory settings
• Run start-up guide
Further information
See section
13.1 Setpoint.
See section
13.2 Operating mode.
See section
13.3 Control mode.
See section
13.3.1 AUTOADAPT.
See section
13.3.2 FLOWADAPT.
See section
13.3.3 Proportional
See section
13.3.4 Constant pressure.
See section
13.3.5 Constant temperature.
See section
13.3.6 Differential temperature.
See section
13.3.7 Constant curve.
See section
13.4 FLOWLIMIT.
See section
13.5 Automatic Night
See section
13.6 Relay outputs.
See section
13.7 Setpoint influence.
See section
13.7.1 External setpoint
See section
13.7.2 Temperature
See section
13.8 Bus communication.
See section
13.8.1 Pump number.
See section
13.9 General settings.
See section
13.9.1 Language.
See section
13.9.2 Set date and
See section
13.9.3 Units.
See section
13.9.4 Enable/disable
See section
13.9.5 Delete history.
See section
13.9.6 Define Home
See section
13.9.7 Display brightness.
See section
13.9.8 Return to factory
See section
13.9.9 Run start-up
pressure.
Setback.
function.
influence.
time.
settings.
display.
settings.
guide.