Connection To The Power Supply (Models 32-Xx) - Grundfos magna3 Installation And Operating Instructions Manual

5.3 Connection to the power supply (models 32-XX)

Step Action
Remove two
screws.
Remove the front
1 cover from the
control box and
access the power
connection.
Locate the power
2
plug inside.
Connect the
conduit to the
control box.
3
Pull the power
supply cable
through the
conduit.
Strip the cable as
illustrated.
Connect the cable
5 conductors to the
power supply plug.
L - L or L1
Ground - Ground
N - N or L2
Insert the power
plug into its mating
connector.
6
Tighten the
conduit.
14
Illustration
L (L1) N (L2)
Step Action
Refit the front
7
cover.
Illustration