Menu Options For Epson Connect Services - Epson L7160 Series User Manual

User's Guide
❏ Wi-Fi Auto Connect
Connects the printer to a wireless (Wi-Fi) network using a computer that is connected to the access
point. Insert the software disc supplied with the printer into the computer, and then follow the on-
screen instructions. When you are prompted to operate the printer, run this menu.
❏ Disable Wi-Fi
Disables the connection by turning off the wireless signal without deleting the network information.
To enable the connection, set up the wireless (Wi-Fi) network again.
❏ Wi-Fi Direct Setup
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Manual Network Setup:
Changes the network settings, such as the device name or TCP/IP.
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Related Information
"Checking the Network Connection Status" on page 28
&
"Making Wi-Fi Settings Manually" on page 24
&
"Making Wi-Fi Settings by Push Button Setup" on page 25
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 25
&
"Disconnecting Wi-Fi Direct (Simple AP) connection from the Control Panel" on page 35
&

Menu Options for Epson Connect Services

Select the menus on the control panel as described below.
Settings > Epson Connect Services
Register/Delete:
Register or delete the printer to or from the Epson Connect services.
For usage guides, see the following portal website.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
Suspend/Resume:
Select whether to suspend or resume Epson Connect services.
Email Address:
Check the printer's email address that is registered to the Epson Connect services.
Status:
Check whether or not the printer is registered and connected to the Epson Connect services.
Menu Options for Settings Mode
(Europe only)
138