Section 3: Advanced Functions; Chime Function; Deliberately Omitting A Zone - Pyronix PCX-12 User Manual

Section 3: Advanced Functions

3.1 Chime Function

The C key can be used to select the Chime function while the system is disarmed. If enabled, a tone will sound every
time an entry / exit door is opened.
Whilst enabled, a 'C' will show on the keypad display.
PYRONIX
Time

3.2 Deliberately Omitting a Zone

If a zone has been programmed as 'Omittable' by your installer, you can leave this zone unarmed whilst arming the
rest of the zones in that partition. Follow the procedure below:
1. Enter your PIN code or present your tag, and press the
again. The display shows:
Omit zones?
2. Enter the zone you wish to omit. Always remember to use a leading zero for zones 01 – 09. The display shows:
Omit zones
Zone 02
3. The system will now wait 10 seconds for any additional zones to be entered. After 10 seconds the arming
procedure will continue, and the entry / exit tone will sound. Exit the building as normal.
RINS459-2
A
B
02:30 c
C
D
A
[01]
B
C
D
A
[02]
B
C
D
key. The system starts to arm. Press the
PCX User Manual
key
7