Leaving The Building; Disarming The System; Partial Arming Of The System - Pyronix PCX-12 User Manual

2.3 Leaving the Building

1. Enter your PIN code, or present your tag.
2. Press the key. The entry / exit tone will start.
3. Leave the building by the entry / exit route, closing the door firmly.
4. If fitted, press the 'Push to Arm' button.
5. The entry / exit tone will cease.
This will arm the system using partition A. This partition is usually programmed with all zones active.

2.4 Disarming the System

Upon entering the premises, the entry / exit tone will sound. Enter your PIN code, or present your tag. The system
will disarm, and the entry / exit tone will cease.

2.5 Partial Arming of the System

In some circumstances you may wish to arm only part of the system, leaving some of the building disarmed. For
example, at night you may wish to have the downstairs armed, whilst leaving the upstairs disarmed, or may wish to
have the whole building armed, except for the kitchen, where the dog is.
In this case, follow the procedure below:
1. Enter your PIN code, or present your tag.
2. Press the key (A, B, C or D) that corresponds to the security pattern you require.
3. Press the key. The entry / exit tone will start.
4. Leave the building by the entry / exit route, closing the door firmly, or retire to an unprotected area of the
building.
5. The entry / exit tone will cease.
6
PCX User Manual
RINS459-2