Ignoring An Open Zone; Keypad Personal Attack - Pyronix PCX-12 User Manual

3.3 Ignoring an Open Zone

You may wish to leave a zone open when you arm the system, for example, leaving a window open during the
summer. You can arm the system so that it ignores this open zone, if your installer has programmed this zone as
'Omittable'.
To omit a zone during arming, follow the procedure below:
1. Enter your PIN code or present your tag, and press the
Exit via
Zone 02
2. Press the key. The display shows:
Omit zones?
3. Enter the zone you wish to omit. Always remember to use a leading zero for zones 01 – 09. The display shows:
Omit zones
Zone 02
4. The system will now wait 10 seconds for any additional zones to be entered. After 10 seconds the arming
procedure will continue, and the entry / exit tone will sound. Exit the building as normal.

3.4 Keypad Personal Attack

You can use your PCX system as a personal attack alarm. Simply press the '1' and '4' keys at the same time. To
cancel the alarm, enter your PIN or present your tag.
Note: This facility is only available if your system has had this feature enabled by your installer.
8
A
B
C
D
A
[01]
B
C
D
A
[02]
B
C
D
key. The display shows:
PCX User Manual
RINS459-2