Run System Diagnostic Test - Sun Microsystems Cobalt LX50 User Manual

Managing Platform Events
The Platform Event Manager (PEM) allows you to configure and manage Platform Event Paging (PEP), Baseboard
Management Controller Local Area Network (BMC-LAN) Configuration, and the Emergency Management Port
(EMP).
To use PEM, double-click the Platform Event Manager menu item on the Available Tasks pane of the main SSU
window. The Platform Event Manager main window appears. You can click on the buttons in this window to perform
platform management.

Run System Diagnostic Test

Select Run System Diagnostic test to bring up the Platform Confidence Test menu (see Figure 49).
Figure 49. Platform Confidence Test Menu
You can use this menu to perform the following tests:
• Quick Test
• Comprehensive Test (DEFAULT)
• Comprehensive Test With Continuous Looping
All test results are saved in the
overwritten for each test.
1. Baseboard refers to the Main Board in the server.
file of the current directory, which is normally
RESULT.LOG
User Guide—Sun Cobalt LX50 Server
Using the Service Partition Menu
This file is
C:\PCT.
1
4-15