Waterproofing Kit - Furuno IC-307 Operator's Manual

4. WATERPROOFING KIT

To mount the IC-305 and IC-307 on a bulkhead, use the optional waterproofing kit to keep
water splash out of the units.
Note: This kit cannot be used if the IC-305 or IC-307 is mounted face upward.
OP-xx (For IC-305)
Name
Fixing Tape 24-009-1225
OP-xx (For IC-307)
Name
Waterproofing Cover
Fixing Tape
1. Unfasten four screws to remove cover of IC-305/IC-307.
2. Attach supplied fixing to the underside of the cover as shown in the illustration below.
3. Attach the cover.
4. For IC-307, remove the seal from the waterproofing cover and attach the cover as
shown in the illustration below.
Type Code No.
100-366-200-10
Type
16-023-5501 100-374-950-10
24-009-1225 100-366-200-10
Fixing tape
Qty
2
Code No. Qty
1
2
21