Enabling Uscg Version - Furuno IC-307 Operator's Manual

2.3 Enabling USCG Version

1. FELCOM 15: Press [F8], [2] to show the System Setup menu.
FELCOM 16/18/19: Press [F8], [1] to show the System Setup menu.
2. Press [↓] to choose Command Window and then press the [Enter] key.
Command Window
RFCONCPU ***
[ Main Menu ]
1. Remote Box Setup
2. Internal GPS Setup
Enter JOB No. :
FELCOM 15/16
3. Type "furunoservice" (without quotation marks) in the Enter JOB No. field and then press
the [Enter] key. The prompt PASSWORD appears.
4. Enter password (see FURUNO Information for SSAS) then press the [Enter] key. Then,
the item Main Menu is displayed in reverse video.
5. Press [1], [Enter], [1], [Enter]. One of the following windows appears.
[ DMC ]
1. SSAS(IC-307)
2. DMC
3. OFF
4: SSAS(Momentary SW) E: Exit
Enter No.:
FELCOM 15
[ SSAS ]
1. OFF
2. IC-307 (Standard SSAS)
3: IC-307 (Russia SSAS)
4: SSAS (Momentary SW)
E: Exit
Enter No.:
FELCOM 18
6. Press [4] (FELCOM 15/18/19) or [3] (FELCOM 16) to enable the USCG version.
7. Press the [Esc] key several times to close the menu.
Command Window
[Main menu]
1. Remote Box Setup
2. External Alarm Setup
3. AMS Setup
4. Management Profile Setup
Enter JOB No.:
FELCOM 18/19
[ SSAS ]
1. ON(IC-307)
2. OFF
3: Momentary SW (for USCG)
E: Exit
Enter No.:
FELCOM 16
[ SSAS]
1. OFF
2. IC-307(Standard)
3: IC-307(Russian)
4: Momentary SW (for USCG)
E: Exit
Enter No.:
FELCOM 19
8