Chapter One Introduction; System Introduction; Function Introduction - KERUI G18 User Manual

Chapter One Introduction

1.1 System Introduction

This alarm system is a high-end GSM alarm with stable and reliable performance
and applies 1.7-inch TFT color screen and touch keyboard with built-in powerful
CPU master and excellent operation experience. Automatic voice prompt or SMS
message notify the location and events upon alarm. Compatible with wireless
PIR sensor, door sensor, smoke detector, gas detector, panic button etc. It has
been widely used in home, factor y, school, shop, villa and residential area to
provide protection for valuable assets.

1.2 Function Introduction

TFT color display, humanized menu, operation with voice prompt, easy to use
There are 99 zones and 8 zone types optional in each zone; ON/OFF siren in
each zone is available.
4 sets scheduled arm/disarm/stay arm function by zone/day/time.
6 groups alarm phone No., automatically dial preset phone number when
power failure.
10s automatic message recording with built-in artificial voice, so that user can
know the alarm place and zone when receive the alarm call remotely.
Arm/Disarm, Monitor, Speaker, siren ON/OFF, smart socket ON/OFF remotely.
Wireless study 1527 series accessories, and as much as 99 detectors and
remote controls.
Telephone/SMS message long-distance control for arming, disarming,
monitoring, remote announcement.
APP control host set and administration, and supports IOS/Android.
Host can call other phones directly as a common phone
One-way alarm linkage wireless relay, and one-way wireless strobe siren
Integrate high precision clock chip so that time never lost even power failure.
Display the latest 72 arm/disarm and 102 alarm records
2 groups of CID number. Compatible with international alarm networking
protocol Contact ID
Low-voltage indication and anti-tamper
Built-in rechargeable high capacity LI batter y and supply power automatically
when power supply failure
Caller ID display, power-off reminder.
Host applies four frequency GSM/GPRS module
Chapter Two Host Installation
Host should be installed in the central position of the guard area to receive the
signals from detectors best. Keep away from large mental objects or appliances
with high frequency interference, meanwhile, avoid the reinforced concrete
walls and fire doors barriers etc.
Host Front View
ON/OFF
Power Base
SIM Card Base
Host Keypad and Side View
Host Back View
Key Arm
Key Disarm
Key Back
Key Confirm
Key Menu
Tamper Button