Add Host Account; Operation Method; Chapter Six Receiving Alarms And Remote Control; Handing Method After Receiving Alarm - KERUI G18 User Manual

5.2 Add Host Account

This step can bind the control panels to APP. One G18 APP can add multiple control
panel. You can operate several control panels through one APP.
The method to add host account: Click G18 APP, enter User Log in interface.
+
】 to enter user registration interface; Then enter the user name,
Click button【
host number and account password, and click [Finish] button to complete the
registration. The host number entered is the SIM card number within the host.
Account name can be customized. Account password is system password.
Login +
use
13712345678
1234
1234

5.3 Operation Method

Once register host account, it will display account name in the home Page. Click
account name to enter operation interface; Slide to the left to enter setting interface
and other interfaces. For, iOS system, click icon for sending information, APP will
jump to SMS message interface. Click
Opera
N umber Set
Time Set
Defense Set
SMS Set
Illegal Arm
ON
OFF
Opera Set Other Opera
【 】
Login Login
use
【 】
Send . When the SIM card of alarm host
Setting
Other
Current User
User：use
Host：13588888888
Password：1234
Switch
Change Host
Language
About
Set Other Opera Set Other
receives text message, the panel will make a sound like"di" and reply message
to the phone automatically. The setting is successful.
Take setting alarm phone number as example:
Click account name and enter the user interface. Then slide to the left to enter
into the setting interface. Click Set Phone Number and select Alarm Phone
】
Number to enter the alarm phone number setting page . The interface can set
6 groups of alarm telephone numbers (1-6 group), and three groups of the elderly
help calls (7-9 group). Click Enter Alarm Number or【
number at pop-up input field to set. Click
SIM card. Click 【
+
icon to delete alarm phone numbers.
Setting
Number Set
Alarm Telephone Number
Alarm Code
Network Telephone Number
CID CID
Time Set
Defense Set
SMS Set
I II I
Opera Set

Chapter Six Receiving Alarms and Remote Control

6.1 Handing method after receiving alarm:

When there is an alarm, the host will automatically dial the telephone number
set before and alerting according to the setting. If the phone line of the owner
is busy or can not be connected, the system will dial the next pre-set number
automatically. The system will dial the preset phone number three times. After
receiving the alarm call, it will play the preset recording . The user doesn't need
to enter a password. The following is the corresponding operation when pressing
the figures on phone:
Key [1]: Arming
Key[4]: Monitoring Off
Key [7]: Siren On
Key[10]: Ganged Socket Off
Key [*]: Exit and hang up. The system would not dial next phone number.
【 】
【 】
【 】
OK to send text messages to host
】 icon, you can quer y alarm telephone numbers; click【
Alarm Phone No.
input_telephone
1
input_telephone
2
input_telephone
3
input_telephone
4
input_telephone
5
input_telephone
6
input_telephone
7
input_telephone
8
input_telephone
9
Other Opera Set Other
Key[2]: Disarming Key [3]: Monitoring On
Key [5]: Speaker On Key[6]: Speaker Off
Key[8]: Siren Off Key [9]: Ganged Socket On
【
】 icon , input alarm
】
Alarm Phone No.
input_telephone
1
input_telephone
2
input_telephone
3
Alarm Phone No.
input_telephone
4
input_telephone
5 Confirm
input_telephone
6
input_telephone
7
input_telephone
8
input_telephone
9
Opera Set Other