Advertisement
Electrical system
9 . 9
14.la Retaining screw on front turn signal
14.lb Retaining screw on rear turn signal
lens
lens
14.5a Retaining screw is in the back of the
turn signal unit
14.5b Note the clip on the inner edge of
the lens
14.9a Undo the screw.
. .
14.9b
.
.
.
and lift off the lens
14 Turn signal bulbs
-
renewal
Speedfight models
1 Undo the screw securing the turn signal
lens and lift off the lens (see illustrations).
Where fitted, unclip the bulb cover, then push
the bulb into the socket and turn it anti-
clockwise to remove it.
2 Check that the contacts inside the socket
are clean and free from corrosion. Line up the
pins on the bulb body with the slots in the
socket, then push the bulb in and turn it
clockwise until it locks into place.
3 Where fitted, fit the bulb cover. Install the
lens and tighten the fixing screw securely.
4 Check the operation of the turn signal light.
Trekker models
5 Undo the screw securing the turn signal
lens and lift off the lens noting how it fits (see
illustrations). Where fitted, unclip the bulb
cover, then push the bulb into the socket and
turn it anti-clockwise to remove it.
6 Check that the contacts inside the socket
are clean and free from corrosion. Line up the
pins on the bulb body with the slots in the
socket, then push the bulb in and turn it
clockwise until it locks into place.
7 Where fitted, fit the bulb cover. Install the
lens and tighten the fixing screw securely.
8 Check the operation of the turn signal light.
Vivacity models
9 To access the front turn signal bulbs, first
remove the front panel (see Chapter 7). Undo
the screw securing the turn signal lens and lift
off the lens (see illustrations).
10 To access the rear turn signal bulbs, undo
the screws securing the rear light lens and
remove the lens, then unclip the turn signal
lens (see illustrations).
1 1 Unclip the bulb cover, then push the bulb
into the socket and turn it anti-clockwise to
remove it (see illustrations).
14.10a Remove the rear light lens.
. .
14.10b
. . .
then unclip the lens
14.11a Unclip the bulb cover..
.
14.1 1 b
. . .
and remove the bulb
Advertisement
