Advertisement
9.6 Electrical system
7.1 b
. . .
and remove it
7.lc Lift the flap on Vivacity models
7.2a Remove the wiring connector..
.
7.2b
. .
.then release the clip..
.
7 . 2 ~
. . .
and remove the bulb
7.2d Ensure the tabs are properly located
On Vivacity models, lift the flap to access the
bulb retaining clip, noting how it fits, then
Note above. Make sure the tabs on the bulb fit
back of the headlight unit (see illustration).
remove the bulb (see illustrations). Check
correctly in the slots in the bulb housing (see
2 On Speedfight 2 models, disconnect the
that the contacts inside the bulbholder are
illustration). Secure the bulb in position with
wiring connector from the back of the
clean and free from corrosion, then fit the new
the retaining clip. Check that the contacts
headlight bulb (see illustration). Release the
bulb, bearing in mind the information in the
inside the wirina connector are clean and free
7.3a Twist the bulbholder to remove it
. . .
7.3b
.
.
.then push and twist the bulb
7.6a Pull the bulbholder out of its
socket..
.
7.6b
. . .
and pull the bulb out of the holder
from corrosion,jhen install the connector.
3 On all other models, twist the bulbholder anti-
clockwise and draw it out of the headlight unit,
then push the bulb in and twist it anti-clockwise
to release it from the holder (see illustrations).
Check that the contacts inside the bulbholder
are clean and free from corrosion, then fit the
new bulb, bearing in mind the information in the
Note above. Make sure the pins on the bulb fit
correctly in the slots in the bulbholder. Install
the holder in the headlight unit and twist it
clockwise to lock it in position. Check that the
bulbholder wiring connections are tight, clean
and free from corrosion
4 Check the operation of the headlight, then
install the headlight panel (see Chapter 7).
dry cloth when handling new
bulb should break a n d to
increase bulb life.
Sidelight
5 Displace the headlight panel (see Chapter 7).
On Speedfight models, unclip the back of the
headlight unit and remove it (see illus-
tration 7.la).
6 Pull the bulbholder out of its socket in the
headlight unit, then carefully pull the bulb out
of the holder (see illustrations). Check the
Advertisement
