Advertisement
Brakes, wheels and tyres 8.9
14.2 Front wheel is retained by three bolts
14.4 Speedometer cable retaining screw
14.5 Loosen the hub nut (arrowed)
Speedfight models
-
hub assembly
6 Unscrew the hub nut and remove the nut
and washer (see illustration).
7 Draw the hub assembly off the axle. Note how
the speedometer drive tabs on the back of the
hub locate in the speedometer gearbox in the
brake caliper bracket (see illustration). Remove
the plain washer fitted on the axle inside the
speedometer gearbox (see illustration).
8 If required, unscrew the knurled ring that
secures the speedometer cable to the speed-
ometer gearbox, then undo the bolt securing the
toque arm to the caliper bracket and disconnect
the arm from the bracket (see illustration).
Slide the bracket off the axle and draw the axle
out of the monolever arm (see illustration).
14 Front wl.
and hub
removal
i
Removal
4 Remove the wheel (see above). On
Speedfight 2 Furious models, remove the
screw securing the lower end of the
speedometer cable to the caliper bracket and
disconnect the cable (see illustration).
5 Have an assistant apply the front brake,
then loosen the hub nut (see illustration).
Undo the brake caliper mounting bolts and
slide the caliper off the disc (see Section 3).
Note: Do not operate the brake lever while the
caliper is off the disc.
Speedfight models
-
wheel
1 Support the machine in an upright position
with the front wheel off the ground.
2 Undo the three bolts securing the wheel to
the hub assembly and lift the wheel off the
hub (see illustration).
3 To install the wheel, position it on the hub
and align the bolt holes. Install the bolts and
tighten them to the torque setting specified at
the beginning of this Chapter.
14.6 Remove the nut and washer
14.7a Note how the speedometer drive
14.7b
. . .
locate on the speedometer
tabs (arrowed)
. . .
gearbox tabs (arrowed)
I
14.7~ Removc
washer (arrowed)
14.8a Undo the torque arm bolt
14.8b
. . .
then remove the caliper bracket
(arrowed)
. .
.
and axle
e the plain
Advertisement
