Save Configuration; Serial Data Transmission; Automatic Baud Rate Detection - Siemens Insys 56k Operating Manual

Pocket Modem 56k
5.1.2

Save Configuration

If the modem configuration was adjusted to certain user
requirements, these settings can be saved in the user profiles 0
or 1.
Configuration changes will be lost after a RESET or restart if
they were not saved before.
5.2

Serial Data Transmission

5.2.1

Automatic Baud Rate Detection

The modem will automatically detect the baud rate of the
connected PC.
The adjustment to the transmission speed on the phone line is
performed automatically, unless the settings say otherwise.
While a connection is established, both modems attempt to
achieve the joint fastest speed on the phone line.
For an existing connection, the modem must first switch to
command mode.
You will receive the transmission settings ...
e.g.: +MS: V92,1,300,48000,300,56000
This means that a connection between 300 and 56000 bps was
established, preferably according to V.92, depending on the
line quality and the abilities of the remote terminal.
Query the quality of an existing connection
Query the level of an existing connection
Display the connection statistics after the connection is
terminated
Dezember 05
Function
AT&W0 AT&W
AT&W1
+++
AT+MS?
AT%Q
AT%L
AT&V1
7