Mac Address Filtering - UTT N518W Manual

UTT Technologies
Enable Domain Block Notification: If selected, a LAN user accesses a domain
name which is blocked by the Device, the Device will pop up a notice message to
remind the user. And the requested web page will automatically jump to the
specified web page (set on Redirecting URL) after the specified time interval (set
on Redirecting Time).
Notice Title: Specify the title of the notice message.
Redirecting Time: Specify the time interval after which the requested web page
will jump to the specified web page. 0 means that the requested web page will
immediately jump to the specified web page. Leave it blank if you don't want the
requested web page to jump to any other web page.
Redirecting URL: Specify the redirecting URL to which the requested web page
will jump. Leave it blank if you don't want the requested web page to jump to any
other web page.
Notice Content: Specify the content of the notice message.
Preview: Click it to preview the notice message you just configured. The following
figure shows an example of a notice message.
Figure 12-15 Domain Name Blocking Notice Preview
Note:
Only after you have enabled domain filtering and chosen the Only Block Domain
Names in Domain Name List as the filtering mode, the Device will pop up the domain
blocking notice messages to the LAN users.

12.4 MAC Address Filtering

This section describes the Firewall > MAC Address Filtering page. The MAC address
filtering is used to filter the wireless clients based on their MAC addresses. With this
feature, you can either allow or block specific wireless clients to connect to the Device.
http://www.uttglobal.com
Firewall Menu
Page 154