Domain Filtering Settings - UTT N518W Manual

UTT Technologies
12.3.1

Domain Filtering Settings

Enable Domain Filtering: Select to enable this domain filtering entries
Filtering Mode: Specify the mode of domain filtering. There are two available
options:

Only Block Domain Names in Domain Name List: If selected, the Device will
block the LAN users from accessing the domain names in the Domain Name
list, but allow the users to access any other domain names.

Only Allow Domain Names in Domain Name List: If selected, the Device will
allow the LAN users to access the domain names in the Domain Name list,
but block the users from accessing any other domain names.
Network Object: Specify the IP addresses of the packets to which the domain
filtering rule applies. There are two options:

IP Range: Specify the start and the end addresses.

User Group: Select it to choose an address group.
Schedule: Specify the time to which the domain filtering rule applies. You can set
the schedule list on the APP Control > Schedule page.
http://www.uttglobal.com
Figure 12-13 Domain Filtering Settings
Firewall Menu
Page 152