Firmware Upgrade - UTT N518W Manual

UTT Technologies
Note:
1) To avoid any unexpected error, do not power off the Device during importing the
configuration file.
2) The reset operation will clear all custom settings on the Device. It is strongly
recommended that you backup the current configuration resetting the Device.
3) The default administrator username and password both are admin (case
sensitive). The default LAN IP address is 192.168.1.253 with a subnet mask of
255.255.255.0.
4) After the reset operation is complete, you must restart the Device for the default
settings to take effect.

14.5 Firmware Upgrade

On the Application > Firmware page, you can view the current firmware version
information, download the latest firmware from the UTT website, and upgrade the
firmware.
Firmware Version: Shows the current firmware version of the Device.
Hardware Version: Shows the current hardware version of the Device.
To upgrade the Device's firmware, follow these steps:
http://www.uttglobal.com
Figure 14-5 Firmware Upgrade
System Menu
Page 191