Example Of Ap Mode Configuration - UTT N518W Manual

UTT Technologies
5.6

Example of AP Mode Configuration

1) Requirements:
Some users want to put desktop computers, laptops, Tablet PCs, smartphones on
the Internet via wireless devices and prevent strangers from accessing to the
Devices. Here, the gateway address is 192.168.1.1.
2) Analysis:
Desktop computers are connected via a network cable to the LAN port of the
Device; laptop, Tablet PC, etc. are wirelessly connected to the Device and need to
be authenticated.
3) Configuration Steps
Configure the TCP/IP properties for the local computer.
Step 1
Step 2 Upon logging in the Device, then configure the LAN port of the Device,
here, the gateway address is set as 192.168.1.1.
Step 3 Enter into the Wireless > Basic page, change the operation mode of the
Device to AP Mode and configure the Device's wireless basic parameters,
as shown in the figure below.
http://www.uttglobal.com
Figure 5-12 Network Topology_AP Mode Example
Wireless Menu
Page 56