UTT N518W Manual page 189

UTT Technologies
default values, and the preferred phase 2 proposal is esp-aes256-md5; in addition,
the preshared key is testing, and the IP addresses are as follows:
The Device at the head office:

WAN Interface IP Address: 200.200.202.123/24

Default Gateway IP Address: 200.200.202.254/24

LAN Interface IP Address: 192.168.123.1/24
The Device at the branch office:

WAN Interface IP Address: 200.200.202.16/24

Default Gateway IP Address: 200.200.202.254/24

LAN Interface IP Address: 192.168.16.1/24
1) Configuring the Device at the head office
Go to the VPN > IPSec > IPSec Settings page, make the following settings (leave the
default values for the other parameters), and then click the Save button.
Connection Type
Gateway IP/Domain Name
(Remote)
Subnet IP (Remote)
Subnet Mask (Remote)
Bind to (Local)
Subnet IP (Local)
Subnet Mask (Local)
Preshared Key
P2 Encrypt/Auth Algorithms 1
2) Configuring the Device at the branch office
Go to the VPN > IPSec > IPSec Settings page, make the following settings (leave the
default values for the other parameters), and then click the Save button.
http://www.uttglobal.com
VPN Menu
Bidirectional
200.200.202.16
192.168.16.1
255.255.255.0
WAN1
192.168.123.1
255.255.255.0
testing
esp-aes256-md5
Page 182