Ap Mode - UTT N518W Manual

UTT Technologies

5.1.1 AP Mode

Enable Wireless: Select to open 2.4GHz Wireless network.
Operation Mode: Select AP Mode (namely the pure AP mode), in which the peer
device can be a single client.
SSID: The SSID (Service Set Identification) is also known as the wireless network
name, which is used to uniquely identify a wireless network. It is case sensitive.
Wireless Mode: Specify the wireless modes of the Device. The options are 11g
Only, 11n Only, 11b/g/n Mixed and 11g/n Mixed.

11g Only: pure 802.11g mode, in which the maximum rate is up to 54Mbps.
The wireless clients in compliance with the IEEE 802.11g standard can be
connected to the Device.

11n Only: pure 802.11n mode, in which the maximum rate is up to 300Mbps.
The wireless clients in compliance with the IEEE 802.11n standard can be
connected to the Device.

11b/g/n Mixed: The wireless clients in compliance with IEEE 802.11b, 802.11g
or 802.11n standard will be connected according to their wireless modes, with
the maximum rates of 11M bps, 54M bps and 300M bps respectively.
http://www.uttglobal.com
Figure 5-1 AP Mode
Wireless Menu
Page 44