UTT N518W Manual page 109

UTT Technologies
9.3.3.2 Account Settings
9.3.3.2.1 PPPoE Account List
When you have configured some PPPoE accounts, you can view their configuration in
the PPPoE Account List, including User Name, Enable, Static IP Address, User Status
and so on.
Add a PPPoE Account: Click the Add button to go to the setup page, and then
configure it, lastly click the Save button.
Enable a PPPoE Account: Select the Enable check box to enable the
corresponding PPPoE account. If you want to disable the PPPoE account
temporarily instead of deleting it, please click it to remove the check mark.
Edit a PPPoE Account: Click the Edit hyperlink, the related information will be
displayed on the setup page. Then modify it, and click the Save button.
Delete PPPoE Account(s): Select the leftmost check boxes of them, and then
click the Delete button.
9.3.3.2.2 PPPoE Account Settings
In the PPPoE > Account Settings page, you can configure PPPoE account related
parameters, which include basic parameters, rate limit parameters and so on.
http://www.uttglobal.com
Figure 9-12 PPPoE Account List
User Management Menu
Page 102