Mac Filtering - UTT N518W Manual

UTT Technologies
Pre-shared Key: The preset initialization key, with the value of 8 ~ 63 characters.
Key Renewal Interval: Key Renewal Interval: Specify the value of frequency (in
seconds) the WPA group key changes. Value range is 60 ~ 86400 seconds. The
default value is 3600 seconds, which means no update when the value is 0.
5.3

MAC Filtering

This section describes the Wireless > MAC Filtering page. The MAC address filtering
is used to filter the wireless clients based on their MAC addresses. With this feature,
you can either allow or block specific wireless clients to connect to the Device.
Enable MAC Address Filtering: Select to enable MAC address filtering.
Filtering Mode: Select the mode of MAC address filtering.

Only allow MAC addresses listed below: If selected, the wireless clients with
MAC address listed in MAC Filter List will be allowed to connect the Device,
but block all other wireless clients.

Only block MAC addresses listed below: If selected, the wireless clients with
MAC address listed in MAC Filter List will be blocked to connect the Device,
but allow all other wireless clients.
MAC Address Filtering List: Display all the MAC Filter entry you have set.
http://www.uttglobal.com
Figure 5-8 MAC Filter
Wireless Menu
Page 52