UTT Technologies
Enable HTTP: Select this check box to allow HTTP remote management. When
accessing the Device from Internet, you will enter http:// and enter the Device's
WAN IP address, followed by a colon (:) and the port number. For example, if
WAN IP address is 218.21.31.3 and the port number is 8081, enter in your
browser: http://218.21.31.3:8081.
Management Port: Enter the port number for HTTP remote management. The
default value is 8081.
Note:
To ensure security, it is strongly recommended that you don't enable remote
management functions unless necessary. If you are sure to enable them, you had
better change the default password.
14.7 Scheduled Task
This section describes System > Scheduled Task page. By configuring scheduled
tasks, administrators can predefine the actions completed by the device at a specified
time. The following figure displays the scheduled task you have set.
http://www.uttglobal.com
Figure 14-6 Remote Management
System Menu
Page 193