UTT N518W Manual page 72

UTT Technologies

Add a Port Forwarding Rule: Click the Add button, then setup it, lastly click
the Save button.

Edit a Port Forwarding Rule: Click the Name or Edit hyperlink of this rule
entry, the related information will display in the setup fields. Then modify it,
and click the Save button.

Delete Port Forwarding Rule(s): Select the leftmost check boxes of entries,
and then click the Delete button.
7.1.1.2 Port Forwarding settings
Name: Specify a name of this entry. It should be between 1 and 11 characters
long.
Enable: Select to enable this Port Forwarding entry.
Protocol: Select the transport protocol used by the service, available options are
TCP, UDP and TCP/UDP.
Start External Port: Specify the lowest port number provided by the Device. The
external ports are opened for outside users to access.
IP Address: Specify the IP address of the local server that you want outside users
to access.
Start Internal Port: Specify the lowest port number of the service provided by the
LAN host. The Start External Port and Start Internal Port can be different.
Port Count: Specify the number of ports used by the service. If the service uses
only one port number, enter 1. For example, if the start internal port is 21, the start
http://www.uttglobal.com
Figure 7-2 Port Forwarding Setup
Advanced Menu
Page 65