Binding List - UTT N518W Manual

UTT Technologies
you change a LAN host's IP address or MAC address, this LAN host will be
unable to access the Device and access the Internet through the Device, but it
still can communicate with the other LAN hosts, such as, it can browse Network
Neighborhood, use windows file and printer sharing services within the LAN, and
so on.

9.2.2 Binding List

You can view and edit all the IP/MAC Binding entries on User Management > IP/MAC
binding > Binding List page.
Add an IP/MAC Binding: Click the Add button or select the Binding Settings tab to
go to the setup page, and then configure it, lastly click the Save button.
Edit an IP/MAC Binding: Click its Edit hyperlink, the related information will be
displayed on the setup page. Then modify it, and click the Save button. The Allow
check box is used to allow or block a user matching an IP/MAC binding from
accessing the Device and Internet.
Delete IP/MAC Binding(s): Select the leftmost checkboxes, and then click Delete
on the lower right corner of the IP/MAC Binding List.
Delete All: Click Delete All on the lower right corner of the list, and then click the
OK button.
http://www.uttglobal.com
Figure 9-6 IP/MAC Binding List
User Management Menu
Page 94