Power-Up Self-Test - HP 1652B Getting Started

Power-up
Self-Test
When you turn on the logic analyzer, it performs a series of self-tests.
When it has successfully completed these tests, it loads the operating
system into memory from the disk.
-
When the logic analyzer has completely loaded the operating system it
displays the System Configuration menu as shown below.
System Conf iguretion
-
finalyzer 1
Lnalyzer 2
Type: IO"] Type: 1-1
----------------
I
Note !b
This is the HP 1652B System Configuration menu. If you have an
HP 1653B, the only difference is pod
1
will be assigned to analyzer
1
and pod 2 will be assigned to analyzer 2. There won't be any pods in the
Unassigned area of the display.
HP 16528/1653B
Introducing the
HP 1652B/HP 16538
Getting Started Guide 1-9